Skip to the content
2 layers126.3 × 20 mmRgbled peripheral, the printed circuit board in 3D

Rgbled peripheral

chof747/rgbled-controller

This is a WiFi enabled RGB LED controller with the following features:

Size
126.3 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
26
Pads
83
Tracks, vias
175, 22
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Jun 2025
Updated
4 Jan 2026

Overview

Rgbled peripheral is an open-source printed circuit board by chof747, from the chof747/rgbled-controller repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 126.3 × 20 mm with 15 parts on 26 nets, routed with 175 tracks and 22 vias.

It is built around the BAT54C. Its parts include 6 switches, 3 capacitors, 2 ICs, 2 connectors and 1 diode.

Main components

1

README

README.md

RGB-Led Controller

Idea

This is a WiFi enabled RGB LED controller with the following features:

  • Power in from the main 5V power source and stepping down to 3v3 for the MCU
  • Pass through of the power to the led strips
  • ESP8266 MCU with boot strap, reset and flash logic
  • Programming header for auto-reset and flash enabled programming
  • Boot and reset button
  • IDC header breaking out I2C, 3v3, GND, FLASH (as additional GPIO) and RESET pin
  • LED data out (at level of 5V via level shifter)
  • Breakout of not used GPIOs 12-14 plus GND
  • Wake up circuit prepared with a solder bridge

The WiFi controller is also ammended by a peripheral board that contains:

  • 5 Light and 1 Mod Button
  • A Temperature and Humidity Sensor
  • An MCP23017 for IO expansion
  • A breakout for the unused pins of the IO Expander
  • An IDC connection with the same pin-out as the IDC connection of the Controller

Components

  • ESP8266 as an ESP12-F module
  • ME6211C33M5G-N (voltage regulator)
  • 2n7002 MOSFET (level shifting)
  • UMH3N (auto reset circuit)
  • Screw terminals for Power in and LED Power + Control out
  • IDC 2x3 for I2C breakout
  • Std Pin headers for programming header and unused pins breakout
  • 0.5A Fuse
  • SMD Push buttons
  • MCP23017 (I2C)
  • SHT40x (temperature controller)
  • BAT54C (OR Gate type diodes)

Revision History

V1.0 - send to production 26.07.2025

Parts

15
QtyValueFootprintReferences
20.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3
110uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
1BAT54CPackage_TO_SOT_SMD:SOT-23D1
1IC2_HeaderChof747_Connectors:HDR-TH_6P-P2.54-V-F-R2-C3-S2.54-4J2
1LOGOLOGOG***
1MCP23017_SOPackage_SO:SOIC-28W_7.5x17.9mm_P1.27mmU1
1ModChof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EHSW6
1SHT4xSensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPadU2
1Seg 1Chof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EHSW1
1Seg 2Chof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EHSW2
1Seg 3Chof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EHSW3
1Seg 4Chof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EHSW4
1Seg 5Chof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EHSW5
1Spare PinsConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ1

More from chof747/rgbled-controller

1
  • 2 layers70 × 50 mmRgbled controller, the printed circuit board in 3D

    Rgbled controller

    chof747/rgbled-controller

    This is a WiFi enabled RGB LED controller with the following features:

    30 partsCC0-1.0

Similar boards

  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 4 layers51.4 × 61 mmGB LIVE32, the printed circuit board in 3D

    GB LIVE32

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    61 parts379CC-BY-4.0
  • 6 layers76.2 × 20.3 mmDEV G2-NANO, the printed circuit board in 3D

    DEV G2-NANO

    theta-machines/DEV-G2-NANO

    The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.

    141 parts346CERN-OHL-P-2.0
  • 4 layers100 × 123 mmDuet2, the printed circuit board in 3D

    Duet2

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    356 parts258
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 2 layers33 × 22.5 mmTick, the printed circuit board in 3D

    Tick

    jkramarz/TheTick

    The Tick is the next evolution in covert access control system implants for simulating adversary-in-the-middle attacks.

    37 parts183GPL-3.0
  • 4 layers100 × 83 mmModule17-Mainboard, the printed circuit board in 3D

    Module17-Mainboard

    M17-Project/Module_17

    M17 modem board for 9600-baud capable radios

    209 parts129CERN-OHL-W-2.0
  • 2 layers145 × 165 mmBreakpanel, the printed circuit board in 3D

    Breakpanel

    monero-project/kastelo

    The Sekura Monero Hardware Wallet

    690 parts115

Questions

How big is the Rgbled peripheral PCB?

It measures 126.3 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rgbled peripheral use?

15 parts, built around the BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rgbled peripheral KiCad files?

From the chof747/rgbled-controller repository on GitHub, at the commit this page was made from: the board is peripheral/rgbled-peripheral.kicad_pcb and its schematic controller/rgbled-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rgbled peripheral design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).