
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones

Varios PCB design for 3D printers and drones
Tmc raiser is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 15.7 × 23.4 mm with 10 parts on 12 nets, routed with 34 tracks and 1 via.
Its parts include 3 connectors, 2 capacitors, 2 resistors, 1 IC and 1 diode. It belongs with the robots and motor control boards of this library.
Varios PCB design for 3D printers and drones
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 100u | Capacitor_SMD:C_Elec_10x10.2 | C1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | TMC-step-stick | custom-footprints:TMC-step-stick | U1 |
| 1 | header_2x4 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | CONN1 |

ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones








ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones





nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.


clydeshaffer/gametank
design files for the gametank hardware implementation

lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!

COVESA/Open1722
Open-source implementation of the IEEE 1722 protocol, for streaming audio/video, tunneling CAN/LIN messages and enabling remote access to peripherals

system76/thelio-io-hardware
KiCad electrical design of Thelio Io board

It measures 15.7 × 23.4 mm and has 4 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is tmc-raiser/tmc-raiser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).