
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones

Varios PCB design for 3D printers and drones
Tmc adapter is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15.2 × 20.3 mm with 2 parts on 10 nets, routed with 25 tracks and 2 vias.
Its parts include 1 IC and 1 connector. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Varios PCB design for 3D printers and drones
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | TMC-step-stick | custom-footprints:TMC-step-stick | U1 |

ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones








ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones




hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 15.2 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is tmc-adapter/tmc-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).