2 layers83 × 76 mm
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones
180 parts2GPL-3.0
2 layers21.6 × 53.3 mm
Pico riser
ChipCE/juice-plus-pcb2Varios PCB design for 3D printers and drones
- Size
- 21.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 2
- Pads
- 55
- Tracks, vias
- 10, 43
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Aug 2021
- Updated
- 28 Oct 2026
Overview
Pico riser is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 21.6 × 53.3 mm with 3 parts on 2 nets, routed with 10 tracks and 43 vias.
Its parts include 2 connectors and 1 IC. It belongs with the robots and motor control boards and the RP2040 boards of this library.
README
README.mdjuice-plus-pcb
Varios PCB design for 3D printers and drones
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2 |
| 1 | Raspberry-pico-smd | custom-footprints:Raspberry-pico-smd | U1 |
More from ChipCE/juice-plus-pcb
12- 4 layers
- 2 layers99.8 × 48.3 mm
- 2 layers75.4 × 80.6 mm
- 2 layers80 × 100 mm
- 2 layers83.3 × 73.4 mm
- 4 layers80.3 × 25.7 mm
- 2 layers60.5 × 42.5 mm
- 2 layers44.5 × 43.2 mm
Bluetooth JDY-67 dev board
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones
30 parts2GPL-3.0 - 4 layers
- 2 layers75.2 × 40.1 mm
- 2 layers99.8 × 25.4 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Pico riser PCB?
It measures 21.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pico riser use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico riser KiCad files?
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is pico-riser/pico-riser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico riser design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).