
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones

Varios PCB design for 3D printers and drones
Pico motion is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board with 29 parts on 37 nets.
Its parts include 13 resistors, 6 capacitors, 5 connectors, 3 ICs and 1 diode. It belongs with the robots and motor control boards and the RP2040 boards of this library.
Varios PCB design for 3D printers and drones
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R10, R11, R12 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C6 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R8, R9, R13 |
| 2 | 100u | Capacitor_SMD:CP_Elec_10x10.5 | C3, C5 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | Conn_01x03_Female | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J1, J2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | A_MOTOR | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | B_MOTOR | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | Conn_01x02_Female | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Raspberry-pico-no-debug-th | custom-footprints:raspberry_pico_under | U3 |
| 1 | TMC-A | custom-footprints:TMC-step-stick | U1 |
| 1 | TMC-B | custom-footprints:TMC-step-stick | U2 |
The 28 most common of 29 parts.

ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones








ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones




Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards


EvanKrall/pipad
A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.


alvarop/chaac
This is a work in progress for a wireless weather station project.


colinleroy/BurgerDisk
A daisy-chainable Smartport hard drive for the Apple II

esden/glasgow-addons
Various interface addon boards and expansions for the Glasgow Digital Interface Explorer
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is pico-motion/pico-motion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).