Skip to the content
2 layers27.5 × 12.5 mmJST mounter, the printed circuit board in 3D

Varios PCB design for 3D printers and drones

Size
27.5 × 12.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
4
Pads
12
Tracks, vias
12, 12
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Aug 2021
Updated
28 Oct 2026

Overview

JST mounter is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 27.5 × 12.5 mm with 10 parts on 4 nets, routed with 12 tracks and 12 vias.

It belongs with the robots and motor control boards of this library.

README

README.md

juice-plus-pcb

Varios PCB design for 3D printers and drones

Parts

10
QtyValueFootprintReferences
4Conn_01x01_Femalecustom-footprints:solder-padJ3, J4, J5, J6
2Conn_01x02_FemaleConnector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_VerticalJ1, J2

The 6 most common of 10 parts.

More from ChipCE/juice-plus-pcb

12
  • 2 layers83 × 76 mmJST mounter panelized, the printed circuit board in 3D

    JST mounter panelized

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    180 parts2GPL-3.0
  • 4 layersPico extender, the printed circuit board in 3D

    Pico extender

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    94 parts2GPL-3.0
  • 2 layers99.8 × 48.3 mmCar bluetooth, the printed circuit board in 3D

    Car bluetooth

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    60 parts2GPL-3.0
  • 2 layers75.4 × 80.6 mmPwm esc panelized, the printed circuit board in 3D

    Pwm esc panelized

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    58 parts2GPL-3.0
  • 2 layers80 × 100 mmTiming light, the printed circuit board in 3D

    Timing light

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    54 parts2GPL-3.0
  • 2 layers83.3 × 73.4 mmDuplicate, the printed circuit board in 3D

    Duplicate

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    36 parts2GPL-3.0
  • 4 layers80.3 × 25.7 mmAdapter board, the printed circuit board in 3D

    Adapter board

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    35 parts2GPL-3.0
  • 2 layers60.5 × 42.5 mmCar psu generic, the printed circuit board in 3D

    Car psu generic

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    34 parts2GPL-3.0
  • 2 layers44.5 × 43.2 mmBluetooth JDY-67 dev board, the printed circuit board in 3D

    Bluetooth JDY-67 dev board

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    30 parts2GPL-3.0
  • 4 layersPico motion, the printed circuit board in 3D

    Pico motion

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    29 parts2GPL-3.0
  • 2 layers75.2 × 40.1 mmPwm esc, the printed circuit board in 3D

    Pwm esc

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    29 parts2GPL-3.0
  • 2 layers99.8 × 25.4 mmCar bluetooth lite, the printed circuit board in 3D

    Car bluetooth lite

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    27 parts2GPL-3.0

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

How big is the JST mounter PCB?

It measures 27.5 × 12.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the JST mounter use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the JST mounter KiCad files?

From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is JST-mounter/JST-mounter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the JST mounter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).