2 layers83 × 76 mm
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones
180 parts2GPL-3.0
2 layers22 × 60 mm
Esp32-button
ChipCE/juice-plus-pcb2Varios PCB design for 3D printers and drones
- Size
- 22 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 15
- Pads
- 52
- Tracks, vias
- 49, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Aug 2021
- Updated
- 28 Oct 2026
Overview
Esp32-button is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 22 × 60 mm with 14 parts on 15 nets, routed with 49 tracks and 16 vias.
It is built around the XIAO ESP32C3. Its parts include 6 switches, 3 connectors, 2 capacitors, 1 resistor and 1 IC. It belongs with the robots and motor control boards and the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdjuice-plus-pcb
Varios PCB design for 3D printers and drones
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 3 | Conn_01x02_Female | custom-footprints:solder-pad-2p | J1, J2, J3 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | XIAO-ESP32C | custom-footprints:XIAO_ESP32C_SMD | U1 |
More from ChipCE/juice-plus-pcb
12- 4 layers
- 2 layers99.8 × 48.3 mm
- 2 layers75.4 × 80.6 mm
- 2 layers80 × 100 mm
- 2 layers83.3 × 73.4 mm
- 4 layers80.3 × 25.7 mm
- 2 layers60.5 × 42.5 mm
- 2 layers44.5 × 43.2 mm
Bluetooth JDY-67 dev board
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones
30 parts2GPL-3.0 - 4 layers
- 2 layers75.2 × 40.1 mm
- 2 layers99.8 × 25.4 mm
Similar boards
- 2 layers40 × 30 mm
Esphome xiao base
0rax/esphome-xiao-base
XIAO base board PCB & configuration for ESPHome based sensors.
10 parts5CERN-OHL-S-2.0 - 2 layers148 × 61 mm
- 2 layers82.7 × 51.9 mm
- 2 layers22 × 77.4 mm
- 2 layers55.5 × 38 mm
- 2 layers34.9 × 56.5 mm
Home Automation v1
aayu0-0/SEEED-RS485-Extension-Board-reverse-engineering-project
SEEED RS485 Extension Board reverse-engineering project
64 parts - 2 layers150 × 100 mm
Memento
AID-IOT/IOT-Memento-Design
A keepsake PCB built at the AICTE IDEA Lab, Poornima College of Engineering. It is a working board as well as a memento: a Seeed XIAO ESP32C3 drives four WS2812B LEDs and reads a BMP280 pressure/temperature sensor, and…
13 partsMIT - 2 layers48.5 × 48.6 mm
Questions
How big is the Esp32-button PCB?
It measures 22 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-button use?
14 parts, built around the XIAO ESP32C3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-button KiCad files?
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is esp32-button/esp32-button.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-button design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).