
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones

Varios PCB design for 3D printers and drones
Car bluetooth is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.8 × 48.3 mm with 60 parts on 34 nets, routed with 175 tracks and 5 vias.
It is built around the OKI-78SR-5/1.5-W36H-C and TLP785F. Its parts include 20 resistors, 16 capacitors, 7 connectors, 4 ICs and 4 switches. It belongs with the robots and motor control and radio and wireless boards of this library.
Varios PCB design for 3D printers and drones
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R4, R6, R12, R13 |
| 6 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2, C3, C4, C5, C11, C12 |
| 4 | 100n | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C10, C13, C15 |
| 4 | 15K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R7, R10, R11 |
| 4 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C7, C14, C16 |
| 3 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R21, R22 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14, R15 |
| 2 | 470p | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R9 |
| 2 | LED | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R19 |
| 1 | 51K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R18 |
| 1 | 9.1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20 |
| 1 | Bluetooth-M18 | custom-footprints:Bluettoth-module-M18 | U8 |
| 1 | EXT | Connector_JST:JST_XH_B06B-XH-A_1x06_P2.50mm_Vertical | J1 |
| 1 | LINE | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | MUTE_L | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | MUTE_R | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | NEXT/UP | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW3 |
| 1 | OKI-78SR-5/1.5-W36H-C | custom-footprints:OKI-buck-converter-TO220 | U3 |
| 1 | Opamp_Dual_Generic | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | PLAY/PAUSE | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW2 |
| 1 | PREV/DOWN | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW4 |
| 1 | PWR_1 | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | PWR_2 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | TAPE_CONTROL | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | TAPE_SW | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | TLP785 | Package_DIP:DIP-4_W7.62mm_Socket | U1 |
| 1 | juice-plus_logo_3k | custom-footprints:juice-plus_logo_3k | G*** |
| 1 | nezumi_logo_3k | custom-footprints:nezumi_logo_3k | G*** |
The 55 most common of 60 parts.

ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones







ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones










hoangminhanhtai/mdb-esp32-master
ESP32-based MDB Vending Machine Controller (VMC) with support for bill validators, coin changers, cashless devices, and EVA-DTS DEX/DDCMP telemetry for vending machine integration and management.


okemessi/midimalletg
MIDI mallet controller for marimba/other keyboard percussion players
It measures 99.8 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the OKI-78SR-5/1.5-W36H-C and TLP785F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is car-bluetooth/car-bluetooth.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).