
Estop HandHeld
chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

Any Circuit boards or firmware needed for IGVC's electrical systems
Dfdfdf2 is an open-source printed circuit board by chicagoedt, from the chicagoedt/IGVC_Electrical repository on GitHub, published under the MIT licence. It is a 2-layer board of 83.3 × 41.9 mm with 8 parts on 43 nets, routed with 41 tracks and 0 vias.
Its parts include 5 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Any Circuit boards or firmware needed for IGVC's electrical systems
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | P1, P2, P3 |
| 1 | 10 | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R1 |
| 1 | CONN_01X05 | Socket_Strips:Socket_Strip_Straight_1x05 | P0 |
| 1 | CP | Discret:CP4 | C1 |
| 1 | EVM-915-DTS | EVM-915_DTS:EVM-915-DTS-Shape | J1 |
| 1 | Teensy_3.1 | Teensy-3:Teensy-3.1 | U1 |

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 83.3 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the chicagoedt/IGVC_Electrical repository on GitHub, at the commit this page was made from: the board is E-stop/E-stop_Drawing/Estop Drawings/dfdfdf2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).