
Dfdfdfd
chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

Any Circuit boards or firmware needed for IGVC's electrical systems
Estop HandHeld is an open-source printed circuit board by chicagoedt, from the chicagoedt/IGVC_Electrical repository on GitHub, published under the MIT licence. It is a 2-layer board of 105 × 56.5 mm with 24 parts on 55 nets, routed with 44 tracks and 0 vias.
Its parts include 5 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Any Circuit boards or firmware needed for IGVC's electrical systems
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | A2, A3, E2, E3, P1, P5, P6, Power1, RC2, RC3, S2, S3 |
| 4 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R1, R3, R4, R5 |
| 4 | CONN_01X01 | Socket_Strips:Socket_Strip_Straight_1x01 | A1, E1, RC1, S1 |
| 1 | 10 | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R2 |
| 1 | 10uF | Discret:CP4 | C1 |
| 1 | EVM-915-DTS | EVM-915_DTS:EVM-915-DTS-Shape | J1 |
| 1 | Teensy_3.1 | Teensy-3:Teensy-3.1 | U1 |

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

chicagoedt/IGVC_Electrical
Any Circuit boards or firmware needed for IGVC's electrical systems

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.


rusefi/rusefi
rusefi - GPL internal combustion engine control unit

DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

It measures 105 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the chicagoedt/IGVC_Electrical repository on GitHub, at the commit this page was made from: the board is E-stop/E-stop_Drawing/Estop Drawings/Estop_HandHeld.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).