.kicad_pcb.jpg?size=s&soon)
CRVisionController(Pre Cleanup)
cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes
CRVisionControllerRHS is an open-source printed circuit board by cheshirenoir, from the cheshirenoir/CreatiVisionControllerReplacement repository on GitHub. It is a 2-layer board of 95.9 × 82.2 mm with 76 parts on 56 nets, routed with 416 tracks and 27 vias.
It is built around the CES521,L3F. Its parts include 46 diodes, 26 switches and 4 connectors.
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes The 4 sections are designed to be joined with short lengths of patch wire (ribbon cable). See https://ilike8bits.com/total-joystick-madness/ for a build guide.
Notes: Use 0.6mm PCBs when yuou order. You'll need 3 different PCBs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | CES521,L3F | Diode_SMD:D_SMA | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +30 |
| 2 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J1 |
| 2 | Conn_01x05_Female | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J2 |
| 2 | SW_MEC_5E | CheshBits:Jaycar SMD Tactical switch | SW1, SW2 |
| 1 | 1A | CheshBits:Jaycar SMD Tactical switch | SW1 |
| 1 | 1B | CheshBits:Jaycar SMD Tactical switch | SW7 |
| 1 | 1C | CheshBits:Jaycar SMD Tactical switch | SW13 |
| 1 | 1D | CheshBits:Jaycar SMD Tactical switch | SW19 |
| 1 | 2A | CheshBits:Jaycar SMD Tactical switch | SW2 |
| 1 | 2B | CheshBits:Jaycar SMD Tactical switch | SW8 |
| 1 | 2C | CheshBits:Jaycar SMD Tactical switch | SW14 |
| 1 | 2D | CheshBits:Jaycar SMD Tactical switch | SW20 |
| 1 | 3A | CheshBits:Jaycar SMD Tactical switch | SW3 |
| 1 | 3B | CheshBits:Jaycar SMD Tactical switch | SW9 |
| 1 | 3C | CheshBits:Jaycar SMD Tactical switch | SW15 |
| 1 | 3D | CheshBits:Jaycar SMD Tactical switch | SW21 |
| 1 | 4A | CheshBits:Jaycar SMD Tactical switch | SW4 |
| 1 | 4B | CheshBits:Jaycar SMD Tactical switch | SW10 |
| 1 | 4C | CheshBits:Jaycar SMD Tactical switch | SW16 |
| 1 | 4D | CheshBits:Jaycar SMD Tactical switch | SW22 |
| 1 | 5A | CheshBits:Jaycar SMD Tactical switch | SW5 |
| 1 | 5B | CheshBits:Jaycar SMD Tactical switch | SW11 |
| 1 | 5C | CheshBits:Jaycar SMD Tactical switch | SW17 |
| 1 | 5D | CheshBits:Jaycar SMD Tactical switch | SW23 |
| 1 | 6A | CheshBits:Jaycar SMD Tactical switch | SW6 |
| 1 | 6B | CheshBits:Jaycar SMD Tactical switch | SW12 |
| 1 | 6C | CheshBits:Jaycar SMD Tactical switch | SW18 |
| 1 | 6D | CheshBits:Jaycar SMD Tactical switch | SW24 |
.kicad_pcb.jpg?size=s&soon)
cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes


i-Saac-IV/credit-card-clock
A fully functioning clock on a credit card sized PCB.


joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

jpconstantineau/ErgoTravel
A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
It measures 95.9 × 82.2 mm and has 2 copper layers, 1.6 mm thick.
76 parts, built around the CES521,L3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cheshirenoir/CreatiVisionControllerReplacement repository on GitHub, at the commit this page was made from: the board is CRVisionControllerRHS.kicad_pcb and its schematic CRVisionController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cheshirenoir before reusing the design.