
CRVisionControllerRHS
cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes
.kicad_pcb.jpg)
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes
CRVisionController(Pre Cleanup) is an open-source printed circuit board by cheshirenoir, from the cheshirenoir/CreatiVisionControllerReplacement repository on GitHub. It is a 2-layer board of 67.5 × 95.9 mm with 72 parts on 56 nets, routed with 347 tracks and 32 vias.
It is built around the CES521,L3F. Its parts include 46 diodes, 24 switches and 2 connectors.
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes The 4 sections are designed to be joined with short lengths of patch wire (ribbon cable). See https://ilike8bits.com/total-joystick-madness/ for a build guide.
Notes: Use 0.6mm PCBs when yuou order. You'll need 3 different PCBs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | CES521,L3F | Diode_SMD:D_SMA | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +30 |
| 2 | Conn_01x05_Female | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J1, J2 |
| 1 | 1A | CheshBits:Jaycar SMD Tactical switch | SW1 |
| 1 | 1B | CheshBits:Jaycar SMD Tactical switch | SW7 |
| 1 | 1C | CheshBits:Jaycar SMD Tactical switch | SW13 |
| 1 | 1D | CheshBits:Jaycar SMD Tactical switch | SW19 |
| 1 | 2A | CheshBits:Jaycar SMD Tactical switch | SW2 |
| 1 | 2B | CheshBits:Jaycar SMD Tactical switch | SW8 |
| 1 | 2C | CheshBits:Jaycar SMD Tactical switch | SW14 |
| 1 | 2D | CheshBits:Jaycar SMD Tactical switch | SW20 |
| 1 | 3A | CheshBits:Jaycar SMD Tactical switch | SW3 |
| 1 | 3B | CheshBits:Jaycar SMD Tactical switch | SW9 |
| 1 | 3C | CheshBits:Jaycar SMD Tactical switch | SW15 |
| 1 | 3D | CheshBits:Jaycar SMD Tactical switch | SW21 |
| 1 | 4A | CheshBits:Jaycar SMD Tactical switch | SW4 |
| 1 | 4B | CheshBits:Jaycar SMD Tactical switch | SW10 |
| 1 | 4C | CheshBits:Jaycar SMD Tactical switch | SW16 |
| 1 | 4D | CheshBits:Jaycar SMD Tactical switch | SW22 |
| 1 | 5A | CheshBits:Jaycar SMD Tactical switch | SW5 |
| 1 | 5B | CheshBits:Jaycar SMD Tactical switch | SW11 |
| 1 | 5C | CheshBits:Jaycar SMD Tactical switch | SW17 |
| 1 | 5D | CheshBits:Jaycar SMD Tactical switch | SW23 |
| 1 | 6A | CheshBits:Jaycar SMD Tactical switch | SW6 |
| 1 | 6B | CheshBits:Jaycar SMD Tactical switch | SW12 |
| 1 | 6C | CheshBits:Jaycar SMD Tactical switch | SW18 |
| 1 | 6D | CheshBits:Jaycar SMD Tactical switch | SW24 |

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes

cheshirenoir/CreatiVisionControllerReplacement
A bunch of PCBs designed to allow you to replace your failing CreatiVision controller membranes


i-Saac-IV/credit-card-clock
A fully functioning clock on a credit card sized PCB.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset


It measures 67.5 × 95.9 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the CES521,L3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cheshirenoir/CreatiVisionControllerReplacement repository on GitHub, at the commit this page was made from: the board is CRVisionController(Pre Cleanup).kicad_pcb and its schematic CRVisionController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cheshirenoir before reusing the design.