Skip to the content
2 layers209.6 × 154.9 mmID interface, the printed circuit board in 3D

NLP(Nand Logic Processor)のリポジトリ

Size
209.6 × 154.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
86
Nets
226
Pads
641
Tracks, vias
1,312, 834
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
17 May 2023
Updated
13 Oct 2025

Overview

ID interface is an open-source printed circuit board by cherry-takuan, from the cherry-takuan/nlp repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 209.6 × 154.9 mm with 86 parts on 226 nets, routed with 1,312 tracks and 834 vias.

It is built around the CD74HC00M. Its parts include 30 ICs, 23 capacitors, 11 diodes, 11 connectors and 5 resistors. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

readme.md

NLP(NAND Logic Processor)

現在開発中のNANDのみを用いたCPUのプロジェクトです. 現在以下のバリエーションが存在します
NLP-16

  • NLP-16
  • NLP-16A

NLP-16は本プロジェクトの最初の成果物です.2019年(私が高校2年)の冬に設計を開始し,そこから3年ほどかけ製作しました.
動作(Twitter)
単独での動作に成功しましたがいくつかの改善点が見つかったため,NLP-16によって得られた知見を基に改良版としてNLP-16Aを現在は開発中です.
また,NLP-16Aではキット化を目標に設計,製作しています.

Parts

86
QtyValueFootprintReferences
30CD74HC00Package_DIP:DIP-14_W7.62mmU1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +14
22CCapacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mmC1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 +6
11LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11
5Conn_02x10_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_HorizontalJ3, J4, J9, J10, J11
5RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5
5Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1, J5, J6, J7, J8
4MountingHole_PadMountingHole:MountingHole_3mm_PadH1, H2, H3, H4
1C_PolarizedCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC23
1Conn_02x10_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_HorizontalJ2
1LOGOLOGOG***
1R_Network08_SplitResistor_THT:R_Array_SIP9RN1

More from cherry-takuan/nlp

12
  • 2 layers209.5 × 154.9 mmAlu c, the printed circuit board in 3D

    Alu c

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    174 parts45CC-BY-SA-4.0
  • 2 layers209.6 × 154.9 mmY BUS Ctrl, the printed circuit board in 3D

    Y BUS Ctrl

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    155 parts45CC-BY-SA-4.0
  • 2 layers209.6 × 154.9 mmReg, the printed circuit board in 3D

    Reg

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    144 parts45CC-BY-SA-4.0
  • 2 layers209.6 × 154.9 mmInstruction decoder, the printed circuit board in 3D

    Instruction decoder

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    138 parts45CC-BY-SA-4.0
  • 2 layers209.5 × 154.9 mmAlu ctrl, the printed circuit board in 3D

    Alu ctrl

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    113 parts45CC-BY-SA-4.0
  • 2 layers209.6 × 154.9 mmAccumulator, the printed circuit board in 3D

    Accumulator

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    111 parts45CC-BY-SA-4.0
  • 2 layers209.6 × 154.9 mmBUS terminator, the printed circuit board in 3D

    BUS terminator

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    79 parts45CC-BY-SA-4.0
  • 2 layers99.7 × 99.7 mmRS 232, the printed circuit board in 3D

    RS 232

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    61 parts45CC-BY-SA-4.0
  • 2 layers45.7 × 99.1 mmState hold, the printed circuit board in 3D

    State hold

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    56 parts45CC-BY-SA-4.0
  • 2 layers99.7 × 99.7 mmIO board, the printed circuit board in 3D

    IO board

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    41 parts45CC-BY-SA-4.0
  • 2 layers99.7 × 99.7 mmRAM board, the printed circuit board in 3D

    RAM board

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    24 parts45CC-BY-SA-4.0
  • 2 layers87.6 × 61.6 mmDebug, the printed circuit board in 3D

    Debug

    cherry-takuan/nlp

    NLP(Nand Logic Processor)のリポジトリ

    22 parts45CC-BY-SA-4.0

Similar boards

  • 2 layers200 × 200 mmALU, the printed circuit board in 3D

    ALU

    Liu-Yuzh/PEC-1

    Hand made 8bitCPU

    58 parts1
  • 2 layers162.2 × 126.5 mmRedox rev1, the printed circuit board in 3D

    Redox rev1

    mattdibi/redox-keyboard

    Ergonomic split mechanical keyboard

    86 parts2kMIT
  • 2 layers75 × 40 mmPulse shaping extension v1.1, the printed circuit board in 3D

    Pulse shaping extension v1.1

    MKesenheimer/fault-injection-library

    Python library to perform fault-injection attacks on microcontrollers

    86 parts218GPL-3.0
  • 2 layers52 × 90 mmEmu brd, the printed circuit board in 3D

    Emu brd

    rscott2049/DECstation2040

    A RP2040 based DECstation emulator

    86 parts212BSD-3-Clause
  • 2 layers66 × 54 mmWindshield, the printed circuit board in 3D

    Windshield

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    86 parts208
  • 2 layers55.8 × 66.5 mmTadpoleswadge, the printed circuit board in 3D

    Tadpoleswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    86 parts114
  • 2 layers58 × 109 mmMinion, the printed circuit board in 3D

    Minion

    AudioMorphology/Europi

    Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware

    86 parts103
  • 2 layers266 × 89.6 mmMolekulaTWS, the printed circuit board in 3D

    MolekulaTWS

    zzeneg/molekula

    Framework for building ergo keyboards

    86 parts98MIT

Questions

How big is the ID interface PCB?

It measures 209.6 × 154.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ID interface use?

86 parts, built around the CD74HC00M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ID interface KiCad files?

From the cherry-takuan/nlp repository on GitHub, at the commit this page was made from: the board is nlp-16a/Hardware/ID_interface/ID_interface.kicad_pcb and its schematic nlp-16a/Hardware/A_BUS_Ctrl/A_BUS_Ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ID interface design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).