2 layers209.5 × 154.9 mm
2 layers87.6 × 61.6 mm
Debug
cherry-takuan/nlp45NLP(Nand Logic Processor)のリポジトリ
- Size
- 87.6 × 61.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 87
- Pads
- 196
- Tracks, vias
- 415, 89
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 May 2023
- Updated
- 13 Oct 2025
Overview
Debug is an open-source printed circuit board by cherry-takuan, from the cherry-takuan/nlp repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 87.6 × 61.6 mm with 22 parts on 87 nets, routed with 415 tracks and 89 vias.
It is built around the CH32V003F4P6. Its parts include 9 connectors, 2 capacitors, 2 resistors, 1 IC and 1 diode. It belongs with the RISC-V boards of this library.
Main components
1README
readme.mdNLP(NAND Logic Processor)
現在開発中のNANDのみを用いたCPUのプロジェクトです．
現在以下のバリエーションが存在します
- NLP-16
- NLP-16A
NLP-16は本プロジェクトの最初の成果物です．2019年(私が高校2年)の冬に設計を開始し，そこから３年ほどかけ製作しました．
動作(Twitter)
単独での動作に成功しましたがいくつかの改善点が見つかったため，NLP-16によって得られた知見を基に改良版としてNLP-16Aを現在は開発中です．
また，NLP-16Aではキット化を目標に設計，製作しています．
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5, J6, J7, J8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | R_Network08_US | Resistor_THT:R_Array_SIP9 | RN1, RN2 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | CH32V003F4P6 | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | LOGO | G*** |
More from cherry-takuan/nlp
12- 2 layers209.6 × 154.9 mm
- 2 layers209.6 × 154.9 mm
- 2 layers209.6 × 154.9 mm
- 2 layers209.5 × 154.9 mm
- 2 layers209.6 × 154.9 mm
- 2 layers209.6 × 154.9 mm
- 2 layers209.6 × 154.9 mm
- 2 layers99.7 × 99.7 mm
- 2 layers45.7 × 99.1 mm
- 2 layers99.7 × 99.7 mm
- 2 layers99.7 × 99.7 mm
Similar boards
- 2 layers36.1 × 21 mm
- 2 layers32 × 35 mm
- 2 layers50.5 × 94.7 mm
SwordOfSecretsUSBProd
gili-yankovitch/SwordOfSecrets
To solve the challenge you will need to discover a series of flags, hidden inside the sword. Each one will help you unlock the next step in the challenge, to finally reveal the ultimate secret the sword holds.
16 parts47MIT - 4 layers44.8 × 76 mm
- 2 layers52.3 × 16.3 mm
Generic TSSOP20
dwillmore/TSSOP20_breakout
A generic breakout board for TSSOP20 chips to a SIP header meant for breadboard use
45 parts18CERN-OHL-W-2.0 - 2 layers65.4 × 133.6 mm
BSidesTLV2025GloveBadge
bsidestlv/bsidestlv-2025-badge
To solve the challenge you will need to discover a series of flags, hidden inside the badge. Each one will help you unlock the next step in the challenge, to finally reveal the ultimate secret the badge holds.
35 parts13MIT - 4 layers22 × 22 mm
- 2 layers92 × 63.4 mm
Bsidesorl v1
bsidesorlando/2026-badge
The electronic badge for BSides Orlando 2026, themed around retro-futurism: a 1960s World's Fair vision of tomorrow, with Lil Chompy the alligator at the wheel of a flying car.
39 parts5
Questions
How big is the Debug PCB?
It measures 87.6 × 61.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Debug use?
22 parts, built around the CH32V003F4P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Debug KiCad files?
From the cherry-takuan/nlp repository on GitHub, at the commit this page was made from: the board is nlp-16a/Hardware/debug/debug.kicad_pcb and its schematic nlp-16a/Hardware/A_BUS_Ctrl/A_BUS_Ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Debug design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).