

Mini K1-64
- Size
- 56 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 76
- Pads
- 244
- Tracks, vias
- 574, 46
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 May 2024
- Updated
- 2 Mar 2025
Overview
Mini K1-64 is an open-source printed circuit board by chenzch, from the chenzch/WT_S32K1_EVB repository on GitHub. It is a 2-layer board of 56 × 44 mm with 46 parts on 76 nets, routed with 574 tracks and 46 vias.
It is built around the FS32K144HAT0MLHT, CH340N and AMS1117-3.3, with the ZMM5V1 among its other parts. Its parts include 14 resistors, 12 capacitors, 6 connectors, 3 ICs and 1 diode.
Main components
4FS32K144HAT0MLHT
LQFP-64-40℃~+125℃ 2.7V~5.5V 32 Bit 4KB 512KB 58 64KB 80MHz ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsNXP MCUCH340N
SOP-8-20℃~+70℃ 1 2Mbps 3.3V、5V USB 2.0 USB to serial SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsZMM5V1
LL-341 Independent 100nA 35Ω 4.8V~5.4V 5.1V 500mW 550Ω LL-34 Zener Diodes ROHSSlkorZener Diodes
README
README.mdMiniEVB for S32K1. Powered by WTMEC.
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R6, R7, R10, R14 |
| 5 | 0 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R12, R13 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C6 |
| 4 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3, J4, J5, J6 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C8, C9 |
| 3 | Conn_01x01_Pin | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2, H3 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7, C10 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 1 | 1.5K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 8M | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CH340N | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | FS32K144HAT0MLHT | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | JPI | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | KEY | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | L | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | TPI | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ZMM5V1 | Diode_SMD:D_MiniMELF | D1 |
| 1 | ~ | WTMEC:WTLogo | LOGO1 |
| 1 | ~ | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J2 |
Similar boards
- 2 layers34 × 78 mm

- 4 layers90.5 × 68.3 mm

- 4 layers76.5 × 75.5 mm

- 2 layers74.3 × 91.5 mm

- 2 layers50.5 × 94.7 mm

SwordOfSecretsUSBProd
gili-yankovitch/SwordOfSecrets
To solve the challenge you will need to discover a series of flags, hidden inside the sword. Each one will help you unlock the next step in the challenge, to finally reveal the ultimate secret the sword holds.
16 parts47MIT - 2 layers76 × 72 mm

- 4 layers60 × 95 mm

Devboard
tjclement/ecsc23-badge
This repo contains the hardware designs and firmware developed for the ECSC23 hardware challenge by Curious Supplies.
147 parts10 - 2 layers69 × 79 mm

NTC
xuejun7777/Comprehensive-Design-and-Practice-Project-A---Digital-Thermometer-Based-on-NTC
综合设计与实践A项目-基于NTC的数字温度计
44 parts2
Questions
How big is the Mini K1-64 PCB?
It measures 56 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mini K1-64 use?
46 parts, built around the FS32K144HAT0MLHT, CH340N, AMS1117-3.3 and ZMM5V1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mini K1-64 KiCad files?
From the chenzch/WT_S32K1_EVB repository on GitHub, at the commit this page was made from: the board is Mini-K1-64/Mini-K1-64.kicad_pcb and its schematic Mini-K1-64/Mini-K1-64.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mini K1-64 design in my own project?
Its repository states no licence, so its author keeps all rights: ask chenzch before reusing the design.