

F1oc
A tiny STM32F1 based FOC controller 基于STM32F1的无刷控制器
- Size
- 19.6 × 19.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 68
- Pads
- 216
- Tracks, vias
- 363, 93
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Dec 2024
- Updated
- 5 Dec 2024
Overview
F1oc is an open-source printed circuit board by charles-lyc, from the charles-lyc/f1oc repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.6 × 19.6 mm with 55 parts on 68 nets, routed with 363 tracks and 93 vias.
It is built around the SN65HVD230D, DRV8316CRRGFR and MT6701CT-STD. Its parts include 21 capacitors, 17 resistors, 4 ICs, 2 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
3SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversDRV8316CRRGFR
VQFN40-40℃~+125℃ 1.5uA 3 8A 95mΩ SPI Three Phase Yes VQFN40 Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsPower Management - SpecializedMT6701CT-STD
SOP-8-40℃~+125℃ 0°~360° 1.75mm 10mA 3.3V~5V 3.9mm 5mm I2C、SSI Magnetic rotary position sensor No Programmable transmission、Zero position programming、Multi-axis magnetic field detection SOP-8 Position Sensors ROHSNOVOSENSEPosition Sensors
README
README.mdf1oc
A tiny STM32F1 based FOC controller 基于STM32F1的无刷控制器
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C7, C18, C19, C20, C21 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R9, R10, R13, R15, R17 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric | R2, R4, R5, R6 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R12, R14, R16 |
| 3 | 30pF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16 |
| 3 | X5R CERAMIC 16V 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6, C11, C17 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R11 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | Conn_01x04_Shielded | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1, J3 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric | C5 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 47uH | Inductor_SMD:L_Chilisin_BMRx00060630 | L1 |
| 1 | 50V 0.1uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 63V 1uF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CAN_H | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | CAN_L | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | DRV8316CRRGFR | footprints:DRV8316C | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MOTOR_A | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | MOTOR_B | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | MOTOR_C | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | MT6701CT | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | VBATT+ | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | VBATT- | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | X5R CERAMIC 16V 1uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | X5R CERAMIC 47nF | Capacitor_SMD:C_0603_1608Metric | C8 |
Similar boards
- 2 layers50 × 50 mm

- 4 layers71 × 71 mm

SmartKnob Bachelorarbeit
LucasCanete/GermanSmartknob
On the front side there is a ring of RGB Leds for user feedback and at its center a magnetic encoder. The magnetic encoder is key to detect the rotation's direction of the BLDC Motor, that in this project is used as an…
111 parts - 4 layers34 × 37.3 mm

- 4 layers36 × 54.5 mm

V0.2 Custom Motor Driver DRV8316 STM32G4
clawntl/BLDC-Driver
BLDC Driver with STM32G431 and DRV8316
86 parts9AGPL-3.0 - 4 layers55 × 60 mm

Pico dual PMSM BUG79100G DRV8316C
Gepetto/MOTKIN-PCB
Low cost PMSM using RPI Pico, external ADC and integrated mos+driver+current sensing.
85 parts6BSD-3-Clause - 4 layers115 × 55 mm

Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 2 layers189.5 × 130.5 mm

- 4 layers67.4 × 67.4 mm

SCLF Gripper
Tknika-SCLF/sclf-gripper
Deskargatu eta instalatu Antigravity bere webgune ofizialetik. VSCode/Windsurf-en fork bat da eta modu berean funtzionatzen du.
78 parts1
Questions
How big is the F1oc PCB?
It measures 19.6 × 19.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the F1oc use?
55 parts, built around the SN65HVD230D, DRV8316CRRGFR and MT6701CT-STD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F1oc KiCad files?
From the charles-lyc/f1oc repository on GitHub, at the commit this page was made from: the board is hardware/f1oc/f1oc.kicad_pcb and its schematic hardware/f1oc/f1oc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the F1oc design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).