

M2C 2014 capstone car project
DipTrace and KiCAD files for the m2C project
- Size
- 132.1 × 114.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 61
- Pads
- 241
- Tracks, vias
- 836, 97
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Aug 2025
- Updated
- 11 Aug 2025
Overview
M2C 2014 capstone car project is an open-source printed circuit board by chajajonee, from the chajajonee/TheRelativityCo-m2C-PCB repository on GitHub. It is a 2-layer board of 132.1 × 114.3 mm with 59 parts on 61 nets, routed with 836 tracks and 97 vias.
It is built around the DB15, 2N7000BU and IRF641, with the IRF9511 and MC7805ACT among its other parts. Its parts include 20 resistors, 6 ICs, 6 diodes, 3 capacitors and 3 switches.
Main components
5DB15
-Coaxial Connectors (RF)Belden2N7000BU
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 2.1V 200mA 400mW 50pF 5pF 60V TO-92 MOSFETs ROHSonsemiMOSFETsIRF641
TO-220AB-55℃~+150℃ 1 N-channel 1.275nF 100pF 125W 150V 180mΩ@10V 18A 400pF 4V 64nC@10V N-Channel TO-220AB MOSFETsTexas InstrumentsMOSFETsIRF9511
TO-220AB-55℃~+150℃ 1 P-Channel 1.2Ω@10V 11nC@10V 180pF 20W 30pF 3A 4V 80V 85pF P-Channel TO-220AB MOSFETsTexas InstrumentsMOSFETsMC7805ACT
TO-2200℃~+125℃ 1 1A 2V@(1A) 3.2mA 35V 5V 62dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdm2C: Mobile to Car Communication Module w/ AndroidOS (iOS TBD)
m2C is a capstone project among 4 students from San Jose State University.
The team aimed to achieve connectivity between an Android (and iOS TBD) mobile device and an automobile.
Successfully installed a prototype version in April 2014 in Hayward, Fremont, Milpitas, and San Jose California.
Currently, the lead competitor is Viper SmartStart.
Installation
Download the latest Diptrace *.dch Schematic and *.dip PCB Layout files.
Tree:
.
├── Diptrace
│ └── *.dch
└── *.dipUsage
*.dch
*.dip
KiCAD PCB project from converted DipTrace PCB Layout:
Contributing
Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.
Please make sure to update tests as appropriate.
A major thanks to:
- Boran "Brian" Peng, Automotive Master Technician
- Shavinda De Silva, Communication Networks, SIM & GPS
- Joseph Nico Tankeh, Embedded Systems, Arduino & C++
- Jonathan Tuan Tran, Android & (iOS TBD)
... for initiating this project!
A big THANK YOU to Dr. David Parent.
License
Creative Commons
[The Unlicense] (https://choosealicense.com/licenses/unlicense/)
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 2N7000_B | m2C_2014_capstone_car_project:TO-92_B | Door_Stat0, F-Brake0, Key_On0, Key_Stat0, LED_Indicator0, Lights0, P_Brake0, Q9, Start0, Sys_Stat0, Vibration0 |
| 6 | 100k | m2C_2014_capstone_car_project:AXIAL-0.4_R3 | R3, R4, R5, R6, R7, R10 |
| 6 | 1N4148 | m2C_2014_capstone_car_project:DO-35 | D1, D3, D4, D5, D6, D8 |
| 6 | 2.2k | m2C_2014_capstone_car_project:AXIAL-0.4_R3 | R15, R17, R18, R19, R20, R21 |
| 5 | 10k | m2C_2014_capstone_car_project:AXIAL-0.4_R3 | R22, R23, R25, R26, R27 |
| 4 | IRF641 | m2C_2014_capstone_car_project:TO-220_Lock | Lock0, Start_Kill0, Unlock0, Wind_Up0 |
| 3 | G5L | m2C_2014_capstone_car_project:G5LE | K1, K2, K3 |
| 3 | JUMPER-3-OLDPTH | m2C_2014_capstone_car_project:1X03 | U2, U3, U4 |
| 2 | ARDUINO_SHIELDNO_SILK | m2C_2014_capstone_car_project:DUEMILANOVE_VIAS | AuduinoUno0, ICOMSat0 |
| 2 | POLCAP | m2C_2014_capstone_car_project:CAPPR-2.54_5.08 | C1, C2 |
| 1 | 10k | m2C_2014_capstone_car_project:RPACK-SIP-PTH-5 | U8 |
| 1 | 1k | m2C_2014_capstone_car_project:RPACK-SIP-PTH-5 | U7 |
| 1 | 1k | m2C_2014_capstone_car_project:AXIAL-0.4 | R1 |
| 1 | 1k | m2C_2014_capstone_car_project:AXIAL-0.4_R14 | R14 |
| 1 | 22k | m2C_2014_capstone_car_project:AXIAL-0.4_R3 | R24 |
| 1 | 39-29-9123 | m2C_2014_capstone_car_project:39-29-9123 | J2 |
| 1 | DB15 | m2C_2014_capstone_car_project:DB15 | U5 |
| 1 | IRF9511 | m2C_2014_capstone_car_project:TO-220_Lock | Siren_Out0 |
| 1 | M09 | m2C_2014_capstone_car_project:1X09 | GPS_Module0 |
| 1 | MC7805ACT | m2C_2014_capstone_car_project:TO-220 | UNK5V_Reg0 |
| 1 | POLCAP | m2C_2014_capstone_car_project:CAPPR-2.54_5.08_C3 | C3 |
Similar boards
- 6 layers134 × 84.2 mm

- 2 layers83.8 × 48.3 mm

- 4 layers170.2 × 135.1 mm

Temp
ka6s/rp_adapter
Red Pitaya Shield for HPSDR 1W Transceiver. Controls EB104.ru Hermes RX filter, 300W PA Transmit filter.
147 parts7 - 2 layers100 × 80 mm

- 2 layers160 × 100.3 mm

Z80-SOUND
dennis9819/Z8C-Homebrew-Computer
To easily develop for my Z80 homebrew system, I designed a simple assempler development environment. This packs the following tasks into one script: zmac assembly object file creation (for xmodem upload) monitor file…
105 parts2 - 2 layers40 × 55.2 mm

NeoGeoController2USB
letoine/NeoGeoControllerToUSB
Simple adapter that transforms a NeoGeo controller into a USB controller.
17 parts2GPL-3.0 - 2 layers109.2 × 81.8 mm

ArduinoMegaShield
AlanFord/ArduinoMega6axis
A stepper motor control shield for an Arduino Mega that will support 3 primary off-board motor controllers and 3 on-board Pololu A4988 controllers
41 parts - 2 layers195 × 95 mm

Pra 01
hemanthpruthvi/Stepper-Motor-Controller
Hardware and Firmware for A Custom Stepper Motor Controller
33 parts
Questions
How big is the M2C 2014 capstone car project PCB?
It measures 132.1 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M2C 2014 capstone car project use?
59 parts, built around the DB15, 2N7000BU, IRF641 and IRF9511. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M2C 2014 capstone car project KiCad files?
From the chajajonee/TheRelativityCo-m2C-PCB repository on GitHub, at the commit this page was made from: the board is m2C_KiCAD/m2C_2014_capstone_car_project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M2C 2014 capstone car project design in my own project?
Its repository states no licence, so its author keeps all rights: ask chajajonee before reusing the design.