

MS88SF2 eInk display
Hardware design files for various hobby projects
- Size
- 48.5 × 35.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 57
- Pads
- 176
- Tracks, vias
- 491, 129
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Mar 2021
- Updated
- 7 Mar 2021
Overview
MS88SF2 eInk display is an open-source printed circuit board by chacal, from the chacal/pcbs repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.5 × 35.1 mm with 49 parts on 57 nets, routed with 491 tracks and 129 vias.
It is built around the MS88SF2, LIS3DH and AO3400A, with the MBR0530 and AO3415 among its other parts. Its parts include 14 capacitors, 7 resistors, 5 diodes, 4 transistors and 3 connectors. It belongs with the lEDs and displays boards of this library.
Main components
5MS88SF2
SMD,17.4x23.2mmSMD,17.4x23.2mm Bluetooth Modules ROHSMINEWBluetooth ModulesLIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesAO3415
SOT-23-55℃~+150℃ 1 P-Channel 1.2W 1.45nF 160pF 17.2nC@4.5V 1V 205pF 20V 4A 50mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETs
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q4 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123F | D1, D2, D3 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C12 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D4, D5 |
| 2 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1, SW2 |
| 1 | 0.47R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.3 | C13 |
| 1 | 3R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 68uH | jouni:CD43 | L1 |
| 1 | AO3415 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Battery_Cell | jouni:CR2032_holder | BT1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x04 | Connector_PinSocket_1.27mm:PinSocket_1x04_P1.27mm_Vertical_SMD_Pin1Left | J3 |
| 1 | FPC24/0.5mm | jouni:FPC-24-0.50mm-top-contact | J1 |
| 1 | LIS3DH | jouni:LGA-16_3x3mm_P0.5mm_3x5_hand_solder | U1 |
| 1 | MS88SF2 | jouni:MS88SF2 | MS88SF21 |
| 1 | SolderJumper | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
More from chacal/pcbs
1- 2 layers61.7 × 35.1 mm

Similar boards
- 2 layers80 × 50 mm

Lcd dual
Novin3dp/7inch-hdmi-screen
این برد دولایه (۶۸×۴۲ میلیمتر) همان پنل ۷ اینچ AT070TN92 و تاچ GT915 را این بار از پورت DSI رزبریپای راه میاندازد. نسخهی HDMI در پوشهی hardware/ دستنخورده باقی مانده است.
127 parts1 - 2 layers19 × 19 mm

PBSEQ D2
CIRCUITSTATE/PBSEQ-D2
A simple push-button controlled power sequencer circuit demo board.
22 parts1 - 4 layers90 × 110 mm
.kicad_pcb.jpg?size=s&soon)
- 2 layers37.8 × 50 mm

- 4 layers91.4 × 88.4 mm

- 2 layers80 × 53.3 mm

- 2 layers44.5 × 31.7 mm

- 2 layers89.5 × 31 mm

Flowing dongle
ugokutennp/flowing-dongle-ccd
DIY Multiple Connection Watchman Dongle for SteamVR
36 parts73MIT
Questions
How big is the MS88SF2 eInk display PCB?
It measures 48.5 × 35.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MS88SF2 eInk display use?
49 parts, built around the MS88SF2, LIS3DH, AO3400A and MBR0530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MS88SF2 eInk display KiCad files?
From the chacal/pcbs repository on GitHub, at the commit this page was made from: the board is MS88SF2 eInk display/MS88SF2 eInk display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MS88SF2 eInk display design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).