

PCB Condenser Microphone
Basic Condenser microphone kit that uses the PCB as a backplate
- Size
- 16 × 56.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 15
- Pads
- 63
- Tracks, vias
- 131, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Mar 2018
- Updated
- 29 Jun 2018
Overview
PCB Condenser Microphone is an open-source printed circuit board by ch98-1, from the ch98-1/PCB-Condenser-Microphone repository on GitHub. It is a 2-layer board of 16 × 56.4 mm with 26 parts on 15 nets, routed with 131 tracks and 10 vias.
It is built around the LM358 and SJ-3523-SMT-TR. Its parts include 10 resistors, 5 capacitors, 2 connectors, 1 IC and 1 diode. It belongs with the audio and music boards of this library.
Main components
2LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierSJ-3523-SMT-TR
SMD-25℃~+85℃ 12V 19mm 1A 3.5mm Headphone Jack 5mm 9mm Black Brass、Copper alloy Silver Surface Mount TRS SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
README.mdPCB-Condenser-Microphone
Basic Condenser microphone kit that uses the PCB as a backplate. It is highly recommended to get the pcb manifactured with ENIG finish for flatness and corrosion resistance. For standalone use, it is recommended to go with the shielded design. For the opamp, any 8SOICopamp with the same pinout as LM358 should be able to replace the one on the board, and lower noise opamp such as OPA1678 is recommended for less static. For more information, visit corwinh.com/pcm or read the assembly instructions in the PCB-Condenser-Microphone.pdf file in the instruction-manual directory.
License
All files are licensed under zlib license unless noted otherwise. Some KiCad Library Files (PCB-Condenser-Microphone/PCB-Condenser-Microphone-cache.lib PCB-Condenser-Microphone-Backplate/PCB-Condenser-Microphone-Backplate-cache.lib and PCB-Condenser-Microphone-Clamp/PCB-Condenser-Microphone-Clamp-cache.lib) are licensed under [KiCad Libraries License] (http://kicad-pcb.org/libraries/license/)
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistors_SMD:R_0402 | R4, R5, R6, R7 |
| 3 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C4 |
| 2 | 100M | Resistors_SMD:R_0402 | R9, R10 |
| 2 | 1k | Resistors_SMD:R_0402 | R1, R2 |
| 2 | Strain Relief | Mounting_Holes:MountingHole_2.2mm_M2 | MT1, MT2 |
| 1 | 0.47uF | Capacitors_SMD:C_0603_HandSoldering | C1 |
| 1 | 100k | Resistors_SMD:R_0402 | R8 |
| 1 | 100k | PCB-Condenser-Microphone:TC33X | RV1 |
| 1 | 10K | Resistors_SMD:R_0402 | R3 |
| 1 | 680pF | Capacitors_SMD:C_0603_HandSoldering | C5 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | LED | LEDs:LED_0603_HandSoldering | D1 |
| 1 | LM358 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | Microphone_Condenser | PCB-Condenser-Microphone:Condenser-Microphone-Backplate-30mm-Single-mount | MK1 |
| 1 | Q_NJFET_DSG | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | SJ-3523-SMT | PCB-Condenser-Microphone:SJ-3523-SMT-TR | J2 |
| 1 | SW_SPDT | Buttons_Switches_SMD:SW_SPDT_CK-JS102011SAQN | SW1 |
The 25 most common of 26 parts.
Similar boards
- 2 layers

- 2 layers157.5 × 116 mm

Sequencer
zueblin/Polaron
A DIY drum machine for the teensy microcontroller (hardware / software)
107 parts226 - 2 layers100.9 × 62.4 mm

- 4 layers170 × 170 mm

- 4 layers85 × 56 mm

Radioberry LPF V1.3
pa3gsb/Radioberry-2.x-extensions
Hardware extensions to the Radioberry Ham Radio
116 parts24 - 2 layers100 × 100 mm

- 2 layers46.7 × 16.8 mm

GB DMG Pro Headphone PCB
wiretap-retro/Gameboy-DMG-Headphone-Jack-PCB
A replacement Gameboy DMG headphone jack PCB utilizing all newly manufactured parts -- yes, even the jack.
16 parts18CC0-1.0 - 4 layers25.4 × 25.4 mm

Questions
How big is the PCB Condenser Microphone PCB?
It measures 16 × 56.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Condenser Microphone use?
26 parts, built around the LM358 and SJ-3523-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Condenser Microphone KiCad files?
From the ch98-1/PCB-Condenser-Microphone repository on GitHub, at the commit this page was made from: the board is PCB-Condenser-Microphone/PCB-Condenser-Microphone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Condenser Microphone design in my own project?
Its repository states no licence, so its author keeps all rights: ask ch98-1 before reusing the design.