Skip to the content
4 layersWeather, the printed circuit board in 3D
Copper layers
4
Thickness
1.62 mm
Parts
29
Nets
59
Pads
213
Tracks, vias
263, 55
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Oct 2026
Updated
3 Nov 2026

Overview

Weather is an open-source printed circuit board by cgrover27-ux, from the cgrover27-ux/CubeSat-PCB- repository on GitHub. It is a 4-layer board with 29 parts on 59 nets, routed with 263 tracks and 55 vias.

It is built around the DS18B20 and AO3400A. Its parts include 10 resistors, 6 ICs, 3 capacitors, 2 transistors and 2 connectors. It belongs with the RP2040 boards of this library.

Main components

2

Parts

29
QtyValueFootprintReferences
410kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R5, R6, R10
2100nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8, CforSD1
2AO3400APackage_TO_SOT_SMD:SOT-23Q3, Q4
1.01WSR5R0100FEA:RESM11670X254NR2
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCfirstBat1
11klook at again thoResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
12.2uHInductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolderL2
122ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCoutputCap1
13300ufCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC5
134kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
139Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
145544554:MODULE_4554U7
15kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1AntennaConnector_Coaxial:SMA_Amphenol_132289_EdgeMountAE1
1BreakoutOfTemp+humid+pressureConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ2
1Conn_01x09_SocketConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ1
1DRA818VVHF_UHF_Modules:VHF_UHF_Module_genericU1
1DS18B20Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalU3
1INA180A3Package_TO_SOT_SMD:SOT-23-5U5
1R_PhotoConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalR7
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1
1Solar_CellTestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mmSC1
1TPS563200Package_TO_SOT_SMD:SOT-23-6U8
1~PCM_SparkFun-GNSS:SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic)U4

Similar boards

  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 2 layers195.3 × 64.3 mmSpotwelderix, the printed circuit board in 3D

    Spotwelderix

    swifty99/Spotwelderix

    Spotwelderix

    90 parts2GPL-3.0
  • 2 layers257.8 × 176.8 mmTeensy boardV 1, the printed circuit board in 3D

    Teensy boardV 1

    Cosys-Lab/TruggySense

    Framework for off-road rc-vehicle monitorring

    625 parts1CC-BY-SA-4.0
  • 2 layers126.2 × 143.6 mmSciencepcb, the printed circuit board in 3D

    Sciencepcb

    Sidbit08/ABEX_PCB_v1

    A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.

    100 parts1
  • 4 layers92.1 × 56.7 mmMAIA, the printed circuit board in 3D

    MAIA

    vrmay23/MAIA

    ADAS for blind dogs!

    124 parts1
  • 4 layers48 × 30 mmP11, the printed circuit board in 3D

    P11

    akashihi/P11

    ESPHome interface for Panasonic air conditioners and heat pumps (CN-CNT)

    12 partsGPL-3.0
  • 4 layers100 × 90 mmWattsense main, the printed circuit board in 3D

    Wattsense main

    D7790/BE_Project

    Updated 28 September 2026. This is the current four-layer candidate. Revision A remains separately available in ../wattsense-main/ as the two-layer budget alternative.

    50 parts
  • 2 layers96.5 × 62 mmSpot heater, the printed circuit board in 3D

    Spot heater

    Hauke12345/Boili

    Electrical and mechanical design

    32 parts

Questions

What parts does the Weather use?

29 parts, built around the DS18B20 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Weather KiCad files?

From the cgrover27-ux/CubeSat-PCB- repository on GitHub, at the commit this page was made from: the board is weather.kicad_pcb and its schematic weather-backups/weatherbackupw:aprs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Weather design in my own project?

Its repository states no licence, so its author keeps all rights: ask cgrover27-ux before reusing the design.