

Fernet
A collection of all of my keyboard projects
- Size
- 320.5 × 127.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 166
- Nets
- 106
- Pads
- 943
- Tracks, vias
- 735, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Jul 2019
- Updated
- 30 Apr 2021
Overview
Fernet is an open-source printed circuit board by cfbender, from the cfbender/keyboards repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 320.5 × 127.5 mm with 166 parts on 106 nets, routed with 735 tracks and 35 vias.
Its parts include 3 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdThe Society of the Crossed Keys
In here you will find my growing list of mechanical keyboard design projects, some of which have been run as local or larger GBs with KeyHive.
Please let me know if you have any questions with ordering any PCBs (or let me know if you do it regardless!), or have any questions on how they are designed or function.
Please feel free to open any issues with any cases or PCBs that you have here, and I will do my best to address them!
Acrylic Case Info
All of my acrylic case files follow the below naming standard:
- All layers are numbered starting with 0, and are numbered up from the bottom
- All layers will be designated with
L<layer number> - All feet layers will be designated with
F<layer number> - All M3 cases use M3x20mm screws that tap directly into the bottom layer
- All M2 cases will use M3x15+3mm male-to-female brass barrel standoffs where the standoff taps directly into the bottom layer, and M2x6mm screws to screw into the female end of the standoff
- All feet have M4 holes, but I typically have been using M3x14mm screws with M3 nuts on the inside
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 79 | D | Keebio-Parts:Diode-Hybrid-Back | D_0, D_1, D_2, D_3, D_4, D_5, D_6, D_7, D_8, D_9, D_10, D_11, D_12, D_13, D_14, D_A1 +63 |
| 68 | KEYSW | MX_Only:MXOnly-1U-NoLED | K_0, K_1, K_2, K_3, K_4, K_5, K_6, K_7, K_8, K_9, K_11, K_12, K_13, K_14, K_A1, K_B1 +52 |
| 6 | KEYSW | MX_Only:MXOnly-1.5U-NoLED | K_ALT1, K_ALT2, K_BKSPC1, K_CTRL1, K_CTRL2, K_TAB1 |
| 3 | Rotary_Encoder_Switch | Keebio-Parts:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW0, SW1, SW2 |
| 2 | KEYSW | MX_Only:MXOnly-2.25U-NoLED | K_ENTER1, K_SHIFT2 |
| 2 | KEYSW | MX_Only:MXOnly-1.75U-NoLED | K_CAPS_LOCK1, K_SHIFT1 |
| 1 | Elite-C | Keebio-Parts:Elite-C-castellated-29pin | U0 |
| 1 | Jumper_3_Open | Keebio-Parts:SolderJumperRight | JP0 |
| 1 | KEYSW | MX_Only:MXOnly-2U-NoLED | K_BKSPC2 |
| 1 | KEYSW | MX_Only:MXOnly-7U-ReversedStabilizers-NoLED | K_10 |
| 1 | LOGO | fernet:fernet_icon | G*** |
| 1 | LOGO | crossed_keys:crossed_keys_small | G*** |
More from cfbender/keyboards
3Similar boards
- 2 layers99.5 × 83.1 mm

- 2 layers200 × 100 mm

- 2 layers136.8 × 199.1 mm

St225 20527
schlae/HardDriveInfo
Repair info and schematics for mostly older MFM hard drives
166 parts38 - 2 layers100.8 × 108.6 mm

CVMod8 V2 Main
Thorinair/Avalon-Harmonics
A collection of Avalon Harmonics branded synthesizer modules.
166 parts26CC-BY-SA-4.0 - 2 layers296.5 × 124 mm

5AhG3-18S
doppelhub/Honda_Insight_LiBCM
Replacement BCM for G1 Honda Insight Lithium Conversion
166 parts25CC-BY-SA-4.0 - 2 layers100 × 99.8 mm

Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 2 layers55.4 × 66 mm

- 2 layers126 × 108 mm

Mixerli
stahlnow/mixerli
Battery powered 10 channel (4x2 + 1x2) stereo mixer featuring stereo input level control slider and stereo rotary aux send level control.
166 parts13CERN-OHL-S-2.0
Questions
How big is the Fernet PCB?
It measures 320.5 × 127.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fernet use?
166 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fernet KiCad files?
From the cfbender/keyboards repository on GitHub, at the commit this page was made from: the board is fernet/pcb/fernet/fernet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fernet design in my own project?
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

