Skip to the content
2 layers22 × 15 mmTPS63031, the printed circuit board in 3D

High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Size
22 × 15 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
7
Pads
61
Tracks, vias
57, 4
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Mar 2019
Updated
6 Jun 2019

Overview

TPS63031 is an open-source printed circuit board by cernohorsky, from the cernohorsky/TPS63031 repository on GitHub. It is a 2-layer board of 22 × 15 mm with 10 parts on 7 nets, routed with 57 tracks and 4 vias.

It is built around the TPS63031DSK. Its parts include 4 capacitors, 2 resistors, 2 connectors, 1 IC and 1 inductor. It belongs with the power boards of this library.

Main components

1

README

README.md

TPS63031 breakout board

High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

  • Input Voltage Range: 1.8 V to 5.5 V
  • Output Voltage 3.3 V up to 800 mA

http://www.ti.com/lit/ds/symlink/tps63030.pdf

ToDo:
DRC

Idle current measurement (connected LoRa Node in sleep mode - 5 uA) #TPS63031, #breakout, #buck-boost, #3v3, #battery

Parts

10
QtyValueFootprintReferences
310uCapacitor_SMD:C_0805_2012MetricC1, C3, C4
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2
10RResistor_SMD:R_0603_1608MetricR2
1100nCapacitor_SMD:C_0603_1608MetricC2
174438334015Inductor_SMD:L_Wuerth_MAPI-3012L1
1DNPResistor_SMD:R_0603_1608MetricR1
1TPS63031Package_SON:Texas_S-PWSON-N10U1

Similar boards

  • 4 layers94.1 × 152 mmDevelopment board panel, the printed circuit board in 3D

    Development board panel

    portapack-mayhem/mayhem-mdk

    PortaPack - Module Develoment Kit

    298 parts88GPL-3.0
  • 2 layers69.4 × 113 mmEpaper reader hw, the printed circuit board in 3D

    Epaper reader hw

    mathias4833/epaper-reader-hw

    An open-source e-paper reader

    126 parts75CERN-OHL-W-2.0
  • 4 layers41.4 × 108 mmM17 3310, the printed circuit board in 3D

    M17 3310

    M17-Project/M17_3310

    Mainboard replacement for Nokia 3310

    124 parts68
  • 4 layers54.7 × 78.5 mmDisplayModule PONSv71, the printed circuit board in 3D

    DisplayModule PONSv71

    MasaoC/GPS-TFT-Map_PONS

    鳥人間コンテストに特化したGNSS誘導システム。人力飛行機のパイロットが使いやすいことを目標にした航法装置です。ハードとソフトをオープンソースで開発しています。

    151 parts14MIT
  • 2 layers48.3 × 22.9 mmBuddhabox, the printed circuit board in 3D

    Buddhabox

    jonbro/aleatorium

    lua scriptable musicbox

    54 parts7
  • 2 layers60 × 40 mmEsp ppo v2, the printed circuit board in 3D

    Esp ppo v2

    iho77/ppo_v2

    This work is licensed under a [Creative Commons Attribution-NonCommercial 4.0 International License][cc-by-nc].

    19 parts5
  • 2 layers101.2 × 199.1 mmApollo, the printed circuit board in 3D

    Apollo

    Professor-plum/SAINTCON-BADGE-2026

    Electronic badge for SAINTCON2026

    80 parts5MIT
  • 2 layers16 × 8.5 mmBuckboost, the printed circuit board in 3D

    Buckboost

    TobleMiner/LiIon-buck-boost-3V3

    Simple full voltage range single cell LiIon to 3.3 V buck-boost converter

    8 parts4MIT

Questions

How big is the TPS63031 PCB?

It measures 22 × 15 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TPS63031 use?

10 parts, built around the TPS63031DSK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TPS63031 KiCad files?

From the cernohorsky/TPS63031 repository on GitHub, at the commit this page was made from: the board is TPS63031.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TPS63031 design in my own project?

Its repository states no licence, so its author keeps all rights: ask cernohorsky before reusing the design.