2 layers
MP Tracker
elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker
70 parts89
2 layers49.5 × 49.5 mm
MC34063BoostEvalBoard
cellularmitosis/MC34063BoostEvalBoardAn evaluation board for use with the MC34063 switcher in boost configuration.
- Size
- 49.5 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 16
- Pads
- 100
- Tracks, vias
- 119, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 10 May 2015
- Updated
- 10 May 2015
Overview
MC34063BoostEvalBoard is an open-source printed circuit board by cellularmitosis, from the cellularmitosis/MC34063BoostEvalBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.5 × 49.5 mm with 46 parts on 16 nets, routed with 119 tracks and 0 vias.
It is built around the MC34063. Its parts include 11 resistors, 10 capacitors, 9 inductors, 2 connectors and 1 IC.
Main components
1README
README.mdMC34063BoostEvalBoard
An evaluation board for use with the MC34063 switcher in boost configuration.
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1 | R_AXIAL_0W25_059A_PL | R1, R2, R3, R4, R5, R6, R7, R8 |
| 7 | 100uH | R_AXIAL_0W25_059A_PL | L2, L3, L4, L5, L6, L7, L8 |
| 4 | 100uF | MedCap2 | C1, C3, C6, C8 |
| 4 | 1uF | ANYSSCAP_2_059B_0805 | C2, C4, C7, C9 |
| 4 | TEST | TEST_2 | TP1, TP2, TP3, TP4 |
| 4 | Val** | hole_M3 | H***, H***, H***, H*** |
| 2 | 1uH | R_AXIAL_0W25_059A_PL | L1, L9 |
| 2 | CONN_2 | TERMINAL_BLOCK_2_5mm | P1, P2 |
| 2 | FERRITE_BEAD | FERRITE_AXIAL_04_069A | FB1, FB2 |
| 1 | 0.1uF | CERCAP_2_059A | C10 |
| 1 | 10k | R_AXIAL_0W25_059A_PL | R9 |
| 1 | 1N5819 | DIODE_1A_069A_PL | D1 |
| 1 | 1k | R_AXIAL_0W25_059A_PL | R10 |
| 1 | 220 | R_AXIAL_0W25_059A_PL | R11 |
| 1 | MC34063 | DIP8_059Bi_PL | U1 |
| 1 | OSHW-logo_silkscreen-back_4mm | OSHW-logo_silkscreen-back_4mm | G*** |
| 1 | OSHW-logo_silkscreen-front_3mm | OSHW-logo_silkscreen-front_3mm | G*** |
| 1 | TIM | CERCAP_2_059B_0805 | C5 |
Questions
How big is the MC34063BoostEvalBoard PCB?
It measures 49.5 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MC34063BoostEvalBoard use?
46 parts, built around the MC34063. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MC34063BoostEvalBoard KiCad files?
From the cellularmitosis/MC34063BoostEvalBoard repository on GitHub, at the commit this page was made from: the board is kicad/MC34063BoostEvalBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MC34063BoostEvalBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers98 × 68 mm
Rpi1-adapter
noisebridge/rfid-access-control
Little system to handle RFID access control at Noisebridge
53 parts47GPL-2.0 - 2 layers96.3 × 93.6 mm
- 2 layers101.6 × 114.3 mm
- 2 layers83.5 × 97.5 mm
TeleprinterHat
MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter
145 parts6 - 2 layers93 × 63 mm
- 2 layers42 × 45.1 mm
ESP8266 LED controller
daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel
DIY LEd Strip Controller with ESP-12E
31 parts5GPL-3.0 - 2 layers99.7 × 98.4 mm
Remote3
JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet
182 parts4