
Mhixy
iblue/mhi-xy-bus
Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition

A board which adheres to the bottom of a Hammond 1590B and regulates its temperature.
Isothermal is an open-source printed circuit board by cellularmitosis, from the cellularmitosis/1590b-isothermal repository on GitHub, published under the MIT licence. It is a 2-layer board of 83.8 × 33 mm with 34 parts on 22 nets, routed with 165 tracks and 14 vias.
It is built around the LM358 and 78L05. Its parts include 15 resistors, 9 capacitors, 3 ICs, 3 diodes and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A "daughter board" which attaches to the bottom of a Hammond 1590B and regulates its temperature at 25C.

The resistor values were chosen to map a 20C to 30C window onto (roughly) 0V to 3.3V.

See also this link for PID tuning and measurements of a similar design (based on MCP9701 rather than thermistors).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | CERCAP_15_059B_0805 | C10, C11, C12, C20, C21, C30, C31, C40, C80 |
| 6 | 10R | R_AXIAL_1W_PL | R21, R22, R23, R24, R25, R26 |
| 2 | 10k | R_AXIAL_0W25_059A_PL | R11, TH10 |
| 2 | 33k | R_AXIAL_0W25_059A_PL | R12, R14 |
| 1 | 100k | R_AXIAL_0W25_059A_PL | R29 |
| 1 | 120k | R_AXIAL_0W25_059A_PL | R13 |
| 1 | 1N5819 | DIODE_1A_069A_04_PL | D60 |
| 1 | 1k | R_AXIAL_0W25_059A_PL | R28 |
| 1 | 3.3V | DIODE_SS_059A_03_PL | D40 |
| 1 | 330R | R_AXIAL_0W25_059A_PL | R40 |
| 1 | 470 | R_AXIAL_0W25_059A_PL | R50 |
| 1 | 78L05 | TO-92_U_059A_PL | U30 |
| 1 | ATTINY85-P | DIP8_059A_PL | IC80 |
| 1 | CONN_2X1 | SIL-2 | P60 |
| 1 | CONN_4X1 | SIL-4 | P70 |
| 1 | LED | LED_3MM_069A | D50 |
| 1 | LM358 | DIP8_059A_PL | U1 |
| 1 | NCH_GDS | TO-220_V_069A | Q20 |
| 1 | OSHW-logo_silkscreen-back_4mm | OSHW-logo_silkscreen-back_4mm | G*** |

iblue/mhi-xy-bus
Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition


Thorinair/Avalon-Harmonics
A collection of Avalon Harmonics branded synthesizer modules.



espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

mbarszcz-pcb/c64-rf-modulator-replacement
C64 Composite/S-Video RF Modulator Replacement

It measures 83.8 × 33 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the LM358 and 78L05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cellularmitosis/1590b-isothermal repository on GitHub, at the commit this page was made from: the board is kicad/isothermal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).