

GMA1 SOM
- Size
- 67.6 × 50 mm
- Copper layers
- 6
- Thickness
- 1 mm
- Parts
- 26
- Nets
- 526
- Pads
- 870
- Tracks, vias
- 22, 108
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Feb 2025
- Updated
- 25 Feb 2025
Overview
GMA1 SOM is an open-source printed circuit board by cdg66, from the cdg66/GMA1-2_SOM repository on GitHub, published under the MIT licence. It is a 6-layer board of 67.6 × 50 mm with 26 parts on 526 nets, routed with 22 tracks and 108 vias.
It is built around the RP2040, LAN8742A-CZ-TR and IS66WVC2M16EALL-7010BLI, with the CCGM1A1, HDSM-543B and BSS138 among its other parts. Its parts include 10 transistors, 8 ICs, 4 switches, 2 connectors and 2 crystals. It belongs with the computers and single-board computers boards and the RP2040 boards of this library.
Main components
7RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)LAN8742A-CZ-TR
QFN-24-EP(4x4)0℃~+70℃ 1 1.8V~3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s Ethernet Transceiver RMII QFN-24-EP(4x4) Ethernet Transceivers ROHSMicrochip TechnologyEthernet TransceiversIS66WVC2M16EALL-7010BLI
VFBGA-54(6x8)Built-in auto-refresh logic、Partial array refresh、Refresh conflict indication、Temperature compensated refresh、Built-in voltage sensor、Built-in temperature sensor VFBGA-54(6x8) PSRAM ROHSISSISRAMCCGM1A1
BGA324BGA324 New Arrivals ROHSCologne ChipUncategorisedHDSM-543B
SMD-10P0.56 100mW 17mmx25mmx3.75mm 2 7 Segment Blue Common Cathode SMD-10P LED Segment Displays ROHSBroadcom LimitedLED Segment DisplaysBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 4 | KXT 331 LHS | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1, SW2, SW3, SW4 |
| 2 | IS66WVC2M16EALL-7010BLI | Project_Library:BGA-54_6x9_6.0x8.0mm | U3, U7 |
| 2 | LAN8742A-CZ-TR | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U4, U5 |
| 2 | SG-210STF 25.0000ML0 | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y1, Y2 |
| 1 | CCGM1A1 | Package_BGA:BGA-324_15.0x15.0mm_Layout18x18_P0.8mm_Ball0.45mm_Pad0.4mm_NSMD | U1 |
| 1 | HDSM-543B | Display:HDSM-541B_HDSM-543B | U8 |
| 1 | MAX98357B | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | SODIMM-200_Split | Connector_PCBEdge:SODIMM-200_1.8V_Card_edge | J2 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers50 × 17 mm

- 6 layers50 × 75 mm

- 6 layers67.6 × 50 mm

SOM
fsnitz/CcSoM
An open source system on chip based on the GateMate FPGA from Cologne Chip (Supports: CCGM1A1 & CCGM1A2)
135 parts8 - 2 layers55.9 × 45 mm

FPGABoard GateMate 1
es-ude/elasticai.hardware
Schematics and Board design for ElasticNodeHardware
81 parts4MIT - 4 layers77.7 × 33 mm

- 4 layers102 × 70 mm

- 4 layers135.6 × 54.6 mm

Dragonmanh7
martinribelotta/h7dragonman
STM32H7 board for industrial protocol bridge
147 parts19BSD-2-Clause - 6 layers55 × 40 mm

Questions
How big is the GMA1 SOM PCB?
It measures 67.6 × 50 mm and has 6 copper layers, 1 mm thick.
What parts does the GMA1 SOM use?
26 parts, built around the RP2040, LAN8742A-CZ-TR, IS66WVC2M16EALL-7010BLI and CCGM1A1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GMA1 SOM KiCad files?
From the cdg66/GMA1-2_SOM repository on GitHub, at the commit this page was made from: the board is GMA1_SOM/GMA1_SOM.kicad_pcb and its schematic GMA1_SOM/AUDIO_OUT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GMA1 SOM design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).