Skip to the content
2 layers76.5 × 66.5 mmTimestream reverb, the printed circuit board in 3D

KiCad project for the Timestream reverb guitar pedal

Size
76.5 × 66.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
30
Pads
101
Tracks, vias
270, 4
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Jan 2022
Updated
2 May 2022

Overview

Timestream reverb is an open-source printed circuit board by cdelmoral, from the cdelmoral/timestream-reverb repository on GitHub. It is a 2-layer board of 76.5 × 66.5 mm with 38 parts on 30 nets, routed with 270 tracks and 4 vias.

It is built around the TL072. Its parts include 15 resistors, 12 capacitors, 4 ICs, 1 diode and 1 connector. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Timestream Reverb Guitar Pedal

Timestream Reverb Schematic

This project contains the kicad files for the Timestream Reverb guitar pedal, designed by DEADASTRONAUTFX (thank you!).

Requirements

In order to open the project you will need to have kicad installed in your computer.

Bill of Materials

DesignatorDesignationQuantity
C1,C510uF2
C2,C3,C4100uF3
C6100nF1
C7,C922nF2
C8100pF1
C104.7nF1
C1133nF1
C121uF1
D21N58171
R1330Ω1
R24.7kΩ1
R333Ω1
R4,R5,R6,R71MΩ4
R8,R11,R12,R13,R1510kΩ5
R9,R1422kΩ2
R101kΩ1
RV1,RV3,RV410kb3
RV225kb1
U1L78L05_TO921
U2,U3TL0722
U4Accutronics Digi-Log Reverb (BTDR-2H)1
LED1
Switch ON/ON1
Mono Jack2
9V Jack1
3PDT Switch1

Parts

38
QtyValueFootprintReferences
510kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8, R11, R12, R13, R15
41MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4, R5, R6, R7
3100uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2, C3, C4
310kbtimestream-reverb:Tayda_PotentiometerRV1, RV3, RV4
210uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1, C5
222kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR9, R14
222nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC7, C9
2TL072Package_DIP:DIP-8_W7.62mmU2, U3
1100nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC6
1100pCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC8
11N5817Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10
11uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC12
125kbtimestream-reverb:Tayda_PotentiometerRV2
133Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
133nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC11
14.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
14.7nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC10
1BTDR-2timestream-reverb:TerminalBlock_6pin_2.54mmU4
1Conn_01x05_Femaletimestream-reverb:TerminalBlock_5pin_2.54mmJ1
1L78L05_TO92Package_TO_SOT_THT:TO-92_InlineU1
1SW_SPDTtimestream-reverb:TerminalBlock_3pin_2.54mmSW1

Similar boards

  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers39.6 × 99.1 mmESP32-Eurorack Audio, the printed circuit board in 3D

    ESP32-Eurorack Audio

    ctag-fh-kiel/ctag-tbd

    CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

    128 parts260
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers37 × 113.9 mmVCO, the printed circuit board in 3D

    VCO

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    104 parts208
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146

Questions

How big is the Timestream reverb PCB?

It measures 76.5 × 66.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Timestream reverb use?

38 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Timestream reverb KiCad files?

From the cdelmoral/timestream-reverb repository on GitHub, at the commit this page was made from: the board is timestream-reverb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Timestream reverb design in my own project?

Its repository states no licence, so its author keeps all rights: ask cdelmoral before reusing the design.