Skip to the content
2 layersPower, the printed circuit board in 3D

Telemetry module for a HAB or a rocket, or a car, or a....

Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
21
Pads
118
Tracks, vias
371, 43
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
15 Jun 2015
Updated
24 Aug 2016

Overview

Power is an open-source printed circuit board by cculpepper, from the cculpepper/APRSDongle repository on GitHub. It is a 2-layer board with 28 parts on 21 nets, routed with 371 tracks and 43 vias.

It is built around the TPS63020. Its parts include 9 resistors, 6 capacitors, 3 ICs, 3 diodes and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

#APRSDongle

This is a hardware and software project that aims to be a logger and control module for a high altitude balloon or other device.

##Hardware There are multiple modular boards that each perform a task.
The power board currently regulates 3-5V down to 3.3, suitable for Li-Po cells. It incorporates a microcontroller and switchmode regulator. Power is passed through a header to ease design of later modules.

The radio board uses the Axsem (ON Semiconductor) AX5043 IC and a power amplifier Currently it is set up for the amateur radio 2M band. The chip can do hardware FSK, GMFSK, AFSK and analog FM. Its a really cool chip. The PA will do a watt, nominally. The board also includes a MCU, Freescale KL26 and GPS module on the back.

The main board currently will not work with the new radio as the pinout changed. Currently it is set up for the DRA818 "Baofeng on a chip" 2m radio module. As the data must be generated by audio, its slow and takes a lot of processing to use. The board will be reworked to use the new radio module after testing.

##Software

Software is written in C with the KEIL IDE. This may change in the future because linux, but for now, it works.

Feel free to take a look and contribute!

Parts

28
QtyValueFootprintReferences
2100KResistors_SMD:R_0603R8, R9
210uCapacitors_SMD:C_0805C1, C2
21uCapacitors_SMD:C_0603C4, C5
2RResistors_SMD:R_0603R1, R2
10.01Resistors_SMD:R_0603R5
1100nCapacitors_SMD:C_0603C3
1120uCapacitors_SMD:c_elec_6.3x7.7C6
1137KResistors_SMD:R_0603R4
11uhInductors:SELF-WE-TPC_ML1
155Resistors_SMD:R_0603R6
175Resistors_SMD:R_0603R7
1768KResistors_SMD:R_0603R3
1ATTINY24A-M-FIXEDw_smd_qfn:qfn-20IC1
1AVRProgPin_Headers:Pin_Header_Straight_2x03P3
1CONN_11X2hardwareRev1:1.27mmPitchHeader11X2P2
1DIODEDiodes_ThroughHole:Diode_DO-41_SOD81_Vertical_KathodeUpD1
1FUSESMD_Packages:SMD-2112_PolF1
1LOGOhardwareRev1:giantG***
1NCP508SMD:SOT-23-5U2
1STAT1GLEDs:LED-0805D2
1STAT2RLEDs:LED-0805D3
1TEST-POINT2Measurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP1
1TPS63020hardwareRev1:TPS63020U1
1VINPin_Headers:Pin_Header_Straight_1x02P1

More from cculpepper/APRSDongle

4
  • 2 layersNoname, the printed circuit board in 3D

    Noname

    cculpepper/APRSDongle

    Telemetry module for a HAB or a rocket, or a car, or a....

    608 parts4
  • 2 layers46.3 × 47.6 mmPowerRev2, the printed circuit board in 3D

    PowerRev2

    cculpepper/APRSDongle

    Telemetry module for a HAB or a rocket, or a car, or a....

    102 parts4
  • 4 layers40.9 × 24.9 mmRadio, the printed circuit board in 3D

    Radio

    cculpepper/APRSDongle

    Telemetry module for a HAB or a rocket, or a car, or a....

    92 parts4
  • 2 layersHardwareRev1, the printed circuit board in 3D

    HardwareRev1

    cculpepper/APRSDongle

    Telemetry module for a HAB or a rocket, or a car, or a....

    60 parts4

Similar boards

  • 4 layers55 × 35 mmBeaglephone pocket, the printed circuit board in 3D

    Beaglephone pocket

    HologramEducation/beaglephone-pocket

    A cellular add-on board for the BeaglePocket

    269 parts13CC-BY-4.0
  • 4 layers53 × 33 mmLiPo BuckBoost Charger, the printed circuit board in 3D

    LiPo BuckBoost Charger

    potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020

    This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…

    63 parts9Apache-2.0
  • 2 layers83.8 × 31.8 mmBalthazarPSU, the printed circuit board in 3D

    BalthazarPSU

    Turbosavski/balthazarPSU

    Balthazar open-hardware laptop - PSU charger + audio amplifier module

    88 parts3
  • 2 layers98 × 49 mmAirMQ - ESP8266-0.4.8, the printed circuit board in 3D

    AirMQ - ESP8266-0.4.8

    AirMQ/AirMQ-sensor

    Root repository for AirMQ hardware project

    94 parts2CERN-OHL-P-2.0
  • 2 layers126.7 × 25.3 mmBalthazarPSU2, the printed circuit board in 3D

    BalthazarPSU2

    balthazar-space/Balthazar-PSU-IO-v.2

    Balthazar open-hardware laptop - version 2 of keyboard and touchpad module controller

    148 parts2
  • 4 layers69 × 81 mmSharpCONSOLE, the printed circuit board in 3D

    SharpCONSOLE

    lastlxrd/Pogopo

    Open-source modular ESP32-S3 handheld console featuring custom hardware, a Sharp Memory LCD, pogopoOS, emulation, motion controls, audio, haptics, and expandable modules.

    196 parts2Apache-2.0
  • 6 layersSentinel HYDRA, the printed circuit board in 3D

    Sentinel HYDRA

    dhruv1859/CARVantaBAC

    🧬 CARVanta Next-Generation Precision Oncology & AI CAR-T Cell Platform Interactive 3D Biological Digital Twin • 3D Neural Bridge • Sentinel HYDRA Biosensor

    135 parts1Apache-2.0
  • 6 layers65.6 × 55 mmCameraPCB, the printed circuit board in 3D

    CameraPCB

    JackkP/Semi-Truck-Backup-Camera

    Repository for Team 25 Purdue ECE Senior Design Fall 2025 49022 Senior Design Project. This contains all of the code and schematics for the project. Course-related documentation is stored in google.

    173 parts1

Questions

What parts does the Power use?

28 parts, built around the TPS63020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power KiCad files?

From the cculpepper/APRSDongle repository on GitHub, at the commit this page was made from: the board is hardware/power/power.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power design in my own project?

Its repository states no licence, so its author keeps all rights: ask cculpepper before reusing the design.