4 layers78.1 × 31.1 mm
2 layers78.1 × 31.1 mm
NewmorphS3
ccadic/NewMorphS3-v12SMall S3 DEV Board with PSP Joystick
- Size
- 78.1 × 31.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 51
- Pads
- 246
- Tracks, vias
- 541, 54
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Nov 2022
- Updated
- 12 Nov 2022
Overview
NewmorphS3 is an open-source printed circuit board by ccadic, from the ccadic/NewMorphS3-v1 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 78.1 × 31.1 mm with 39 parts on 51 nets, routed with 541 tracks and 54 vias.
It is built around the ESP32-S3-WROOM-1-N8, ME6211C33M5G-N and BAT54C. Its parts include 13 resistors, 6 capacitors, 5 ICs, 5 switches and 4 connectors. It belongs with the keyboards and input boards and the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdNewMorphS3-v1
SMall S3 DEV Board with PSP Joystick @sulfuroid
Hi all this is the NEW MorphS3 with ESP32S3 wroom chip. You get a battery charger on board - Most of the GPIOS available You have a 176x320 IPS ST7789 Display (compatible with TFT_eSPI There is a small PSP1000 joystick to help you make games USB connection is a SMD USB C
Heve fun.
BOM and links to the components: https://github.com/ccadic/NewMorphS3-v1/blob/main/NewmorphS3-BOM.xlsx
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H101, H102, H103, H104 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R108, R110 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R109, R111 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C102, C103 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R112, R113 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C101, C104 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R102, R103 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C106 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C105 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R105 |
| 1 | 176x320tft_176x320TFT | 27sharp:ST7789-176x320 | U106 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R107 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R101 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R104 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric | R106 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D101 |
| 1 | BATCON | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J102 |
| 1 | BOOT | 27sharp:SKRPABE010 | SW102 |
| 1 | BUT1 | 18650:SW_TP1003 | SW103 |
| 1 | BUT2 | 18650:SW_TP1003 | SW104 |
| 1 | CHARGE | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | ESP32S3-Wroom | 27sharp:ESP32-S3-wrooom | U103 |
| 1 | GPIOLINE1 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J103 |
| 1 | GPIOLINE2 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J104 |
| 1 | JoyStickP1000 | 27sharp:JoystickP1000 | U105 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U101 |
| 1 | ME6211C33M5G-N | Package_TO_SOT_SMD:SOT-23-5 | U102 |
| 1 | ON-OFF | Button_Switch_SMD:SW_SPDT_PCM12 | SW105 |
| 1 | RST | 27sharp:SKRPABE010 | SW101 |
| 1 | USB_C_Receptacle | 27sharp:GT-USB-7010 | J101 |
Questions
How big is the NewmorphS3 PCB?
It measures 78.1 × 31.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NewmorphS3 use?
39 parts, built around the ESP32-S3-WROOM-1-N8, ME6211C33M5G-N and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NewmorphS3 KiCad files?
From the ccadic/NewMorphS3-v1 repository on GitHub, at the commit this page was made from: the board is NewmorphS3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NewmorphS3 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers50 × 50 mm
FC v02
pacman314159/OISP-Drone-Research
mermaid stateDiagram-v2 [] --> POWERON POWERON --> BOOTINIT: Power Applied / Reset BOOTINIT --> SENSORCALIBRATION: Hardware Self-Test Pass BOOTINIT --> SYSTEMERROR: Self-Test Fail SENSORCALIBRATION --> DISARMED…
87 parts - 4 layers58 × 90 mm
Logging
matatma23-gento/embedded-portfolio
This repository collects KiCad hardware design projects. Project specifications, validation results, and individual contributions are being documented; the presence of design files does not imply production readiness or…
76 parts - 2 layers76.6 × 141.1 mm
Oniondao badge
OnionDAO-git/oniondao-badge
An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…
190 parts17 - 2 layers62 × 47.5 mm
Dropsense v2
ParthDhiman32/DropSense
i am creating a product with two parts which you drop from a height and it calculates the height from which you dropped it using pure physics and electronics!!
43 parts2 - 2 layers
Arsh Dev X1
Arsh-Pathan/Arsh-Dev-X1
A custom ESP32-S3 development board built from scratch. Designed to be the ultimate all-purpose platform for makers, students, robotics, IoT, sensors, displays, and hardware-software projects.
20 parts - 2 layers69.6 × 94.2 mm
E ink dashboard
Nxyz-natan/e-ink-dashboard
I designed a custom PCB that integrates: ESP32-S3 microcontroller BME280 sensor Power management (voltage regulator + charging IC) USB-C input Display connector
23 parts - 2 layers93.5 × 75.5 mm
Nindo
saptak70/Nindo-Handheld-gameboy-and-mp3-player--using-esp32
A custom handheld device built from scratch — PCB, firmware, and enclosure. Plays NES/DOOM, streams audio to BT headphones.
65 parts