Arsh-Pathan/Arsh-Dev-X1A custom ESP32-S3 development board built from scratch. Designed to be the ultimate all-purpose platform for makers, students, robotics, IoT, sensors, displays, and hardware-software projects.
Arsh Dev X1 is an open-source printed circuit board by Arsh-Pathan, from the Arsh-Pathan/Arsh-Dev-X1 repository on GitHub. It is a 2-layer board with 20 parts on 44 nets, routed with 301 tracks and 60 vias.
It is built around the ESP32-S3-WROOM-1-N8 and ME6211C33M5G-N. Its parts include 6 resistors, 5 connectors, 3 capacitors, 2 ICs and 2 diodes. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
A custom ESP32-S3 development board designed and built from scratch by Arsh.
Arsh Dev X1 is a general-purpose ESP32-S3 development board focused on embedded development, IoT projects, rapid prototyping, and hardware experimentation.
The board provides native USB-C connectivity, GPIO breakout headers, onboard power regulation, boot/reset controls, OLED display support, and status LEDs in a compact and easy-to-use form factor.
| Component | Description |
|---|---|
| MCU | ESP32-S3-WROOM-1 |
| USB | USB Type-C |
| Regulator | ME6211C33M5 3.3V LDO |
| Display Support | I2C OLED |
| GPIO Headers | Dual 1x15 Headers |
| PCB Layers | 2 |
| Voltage | 3.3V Logic |
| Signal | GPIO |
|---|---|
| SDA | GPIO46 |
| SCL | GPIO47 |
| Signal | GPIO |
|---|---|
| Status LED | GPIO48 |
Current Revision:
Rev AStatus:
🚧 In DevelopmentCompleted:
In Progress:
/
├── Arsh Dev X1.kicad_pro
├── Arsh Dev X1.kicad_sch
├── Arsh Dev X1.kicad_pcb
├── docs/
└── README.mdOpen-source hardware project.
Arsh Pathan
GitHub: https://github.com/Arsh-Pathan
Built with KiCad and a lot of patience.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C12, C14, C15 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1, J3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW3, SW4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | ME6211C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
20 parts, built around the ESP32-S3-WROOM-1-N8 and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Arsh-Pathan/Arsh-Dev-X1 repository on GitHub, at the commit this page was made from: the board is Arsh Dev X1.kicad_pcb and its schematic Arsh Dev X1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Arsh-Pathan before reusing the design.
OnionDAO-git/oniondao-badge
An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…
ParthDhiman32/DropSense
i am creating a product with two parts which you drop from a height and it calculates the height from which you dropped it using pure physics and electronics!!
Nxyz-natan/e-ink-dashboard
I designed a custom PCB that integrates: ESP32-S3 microcontroller BME280 sensor Power management (voltage regulator + charging IC) USB-C input Display connector
pacman314159/OISP-Drone-Research
mermaid stateDiagram-v2 [] --> POWERON POWERON --> BOOTINIT: Power Applied / Reset BOOTINIT --> SENSORCALIBRATION: Hardware Self-Test Pass BOOTINIT --> SYSTEMERROR: Self-Test Fail SENSORCALIBRATION --> DISARMED…
saptak70/Nindo-Handheld-gameboy-and-mp3-player--using-esp32
A custom handheld device built from scratch — PCB, firmware, and enclosure. Plays NES/DOOM, streams audio to BT headphones.
