2 layers124.5 × 46 mm
Digital Clock PCB 2.0 Module Based
CasualCodersProjects/Really-Nice-Digital-Clock
Nice Clock. Mine's Bigger.
77 parts6GPL-3.0
2 layers
Lamp
CC-Ian/LampDimmable, Color Adjustable, RGB Light board for desk lamps
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 88
- Pads
- 310
- Tracks, vias
- 336, 208
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Jul 2024
- Updated
- 11 Aug 2024
Overview
Lamp is an open-source printed circuit board by CC-Ian, from the CC-Ian/Lamp repository on GitHub. It is a 2-layer board with 101 parts on 88 nets, routed with 336 tracks and 208 vias.
It is built around the ESP32-S2-SOLO-2-N4, TLV62569DBV and WS2812B-2020. Its parts include 40 diodes, 37 resistors, 6 capacitors, 2 ICs and 2 transistors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
3
ESP32-S2-SOLO-2-N4
SMD-41P-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 71mA ESP32-S2 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD-41P WiFi Modules ROHSEspressif SystemsWiFi Modules
TLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
WS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +14 |
| 30 | LED | LED_SMD:LED_PLCC_2835 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 10 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D31, D32, D33, D34, D35, D36, D37, D38, D39, D40 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP3, TP4, TP5 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R37 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | Q_NMOS_GDS | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1, SW2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R36 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2u2 | Inductor_SMD:L_Cenker_CKCS4018 | L1 |
| 1 | 470k | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 6p3 | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-S2-SOLO-2 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_Connector_Custom:XKB_U263-14XN-5XQC14 | J2 |
The 97 most common of 101 parts.
Questions
What parts does the Lamp use?
101 parts, built around the ESP32-S2-SOLO-2-N4, TLV62569DBV and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lamp KiCad files?
From the CC-Ian/Lamp repository on GitHub, at the commit this page was made from: the board is Hardware/Mainboard/Mainboard.kicad_pcb and its schematic Hardware/Mainboard/Mainboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lamp design in my own project?
Its repository states no licence, so its author keeps all rights: ask CC-Ian before reusing the design.
Similar boards
- 2 layers150 × 79.8 mm
- 4 layers108.9 × 40.4 mm
SUB tember Titan
theBrutzler/U-Bootloader
Learnin PCB with many Sensors. Made in Twitchstream. SUB Tember board!
90 parts1 - 2 layers30 × 50 mm
Chronos polaris hardware
Anish-Agarwall/Polaris-Flight-Computer
A flight computer designed during my freshman year in university for my Rocketry Organization
61 parts - 2 layers43 × 64.5 mm
Blinky
hdsjulian/sparkles
This repo theoretically contains everything to build, assemble and run the sparkling forests light installation.
72 parts - 4 layers102.7 × 102.7 mm
My drone
Motasim-1/Wifi-quadcopter-pcb
Custom PCB design for a WiFi-controlled quadcopter based on the ESP32 microcontroller. The board was designed in KiCad, assembled using solder paste and a reflow oven, and tested with four motor outputs controlled…
67 parts - 2 layers43.1 × 64.6 mm
Blinky
hdsjulian/sparkles-old
Autonomous blinky devices that triangulate via soundd
69 parts2Apache-2.0 - 4 layers168.2 × 82.9 mm
2024 def con badge v1
RetiaLLC/DefconBadge2026
Retia 2024 DEF CON badge (ESP32-S3): docs, pinouts, flashable firmware incl. DOOM and Meshtastic, examples, KiCad hardware sources
104 parts8