2 layers
MotorSpeedController
sdsmt-robotics/MotorSpeedController
setup() { ... // Init SPI SPI.begin (); SPI.setClockDivider(SPICLOCKDIV4);
24 parts1
2 layers113 × 49 mm
TH8200Control
CatoLynx/TH8200ControlControl board for Siemens TH8200 hand dryer
- Size
- 113 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 52
- Pads
- 139
- Tracks, vias
- 282, 64
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Jul 2020
- Updated
- 11 Aug 2020
Overview
TH8200Control is an open-source printed circuit board by CatoLynx, from the CatoLynx/TH8200Control repository on GitHub. It is a 2-layer board of 113 × 49 mm with 43 parts on 52 nets, routed with 282 tracks and 64 vias.
It is built around the ATMEGA328P-AU, T835-800B and CNY17-3, with the MC7805CT, MOC3052S and BC817 among its other parts. Its parts include 14 resistors, 6 capacitors, 5 ICs, 4 diodes and 4 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
T835-800B
DPAKThyristors (SCR)/ModulesSTMicroelectronics
CNY17-3
DIP-6-55℃~+100℃ 1 1.45V 100% 150mA 200% 250mW 300mV@2.5mA,10mA 5kV 5us 5us@2mA,100Ω 60mA 6V 70V DC Phototransistor DIP-6 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
MC7805CT
TO-220Voltage Regulators - Linear, Low Drop Out (LDO) Regulatorsonsemi
MOC3052S
SMDTriac, SCR Output OptoisolatorsGUOXIN JIAPIN SEMICONDUCTOR
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)ABS15D
ABS-50℃~+150℃@(Tj) 1.1V@2.0A 200V 2A 55A 5uA@200V Single-Phase Rectifier ABS Bridge Rectifiers ROHSDIOTECBridge Rectifiers
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
README
README.mdWhat's this?
A custom controller board for the Siemens TH8200 hand dryer.
BOM
You can find the interactive BOM here.
Pictures
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4.7k | Resistors_SMD:R_0603 | R1, R8, R9, R10, R14 |
| 3 | 100n/50V/X7R | Capacitors_SMD:C_0603 | C3, C4, C5 |
| 3 | BC817 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q3, Q4 |
| 2 | 10k | Resistors_SMD:R_0603 | R6, R7 |
| 2 | 1M | Resistors_SMD:R_0603 | R4, R5 |
| 2 | 470R/0.5W | Resistors_SMD:R_1206 | R2, R12 |
| 2 | CNY17-3 | custom:Optocoupler_SMD_6pin | U1, U2 |
| 1 | 100µ/35V/E | Capacitors_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | 10µ/50V/X7R | Capacitors_SMD:C_1206 | C2 |
| 1 | 180R | Resistors_SMD:R_0603 | R11 |
| 1 | 220µ/3A | custom:Choke_Toroid_13x29mm_Vertical | L1 |
| 1 | 22R/0.5W | Resistors_SMD:R_1206 | R3 |
| 1 | 8 MHz | custom:Resonator_ZTTCC_X.XX_MG | Y1 |
| 1 | ABS15D | custom:Rectifier_SMD_4pin_ABS | D2 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U4 |
| 1 | BV EI 306 3601 | custom:Transformer_Hahn_BVEI3063601 | T1 |
| 1 | HE3-290AC | LEDs:LED_D5.0mm_Horicontal_O5.08mm | D1 |
| 1 | Heater Relay | custom:2_Cables_D1.5mm_P10mm | J2 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_SMT_02x03 | J4 |
| 1 | LL4148 | Diodes_SMD:D_MiniMELF_Standard | D4 |
| 1 | LOGO | custom:xatLabs_small | G*** |
| 1 | LOGO | custom:xatLabs_tiny | G*** |
| 1 | MC7805 | TO_SOT_Packages_SMD:TO-263-3Lead | U3 |
| 1 | MOC3052S | custom:Optocoupler_SMD_6pin | U5 |
| 1 | Mains | custom:2_Cables_D1.5mm_P10mm | J1 |
| 1 | Motor | custom:FASTON_2pin_6.3x0.8mm_P10mm | J3 |
| 1 | SFH 300 | LEDs:LED_D5.0mm_Horicontal_O5.08mm | Q2 |
| 1 | Snubber | Capacitors_SMD:C_0805 | C6 |
| 1 | Snubber | Resistors_SMD:R_0603 | R13 |
| 1 | T835-800B | TO_SOT_Packages_SMD:TO-252-2Lead | D3 |
The 42 most common of 43 parts.
Questions
How big is the TH8200Control PCB?
It measures 113 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TH8200Control use?
43 parts, built around the ATMEGA328P-AU, T835-800B, CNY17-3 and MC7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TH8200Control KiCad files?
From the CatoLynx/TH8200Control repository on GitHub, at the commit this page was made from: the board is Hardware/TH8200Control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TH8200Control design in my own project?
Its repository states no licence, so its author keeps all rights: ask CatoLynx before reusing the design.
Similar boards
- 4 layers75 × 67.7 mm
Pcie water loop controller
agmlego/water-cooling-controller
The intent of this project is to monitor and control an external chiller system for a PC water-cooling loop with a liquid-liquid heat exchanger to separate the internal and external loops.
58 parts2 - 2 layers150 × 100 mm
Kettcar Control HW
CatoLynx/Kettcar_Control_HW
Central controller for my hoverboard-powered Kettcar
121 parts - 2 layers181.1 × 139.9 mm
Campervan management
akladnig/CamperVan
- CamperVan Design and Arduino Circuit Design - Campervan Design Overview - Dashboard App - Electrical System - Sensors - Circuit Design - Battery and voltage monitoring - Voltage Divider Design - Low Pass Filter - TODO
116 parts - 2 layers60 × 98 mm
ENNOID Dual Gate Driver
jagdeepsingh02/ENNOID-Dual-Gate-Driver
Dual Gate Driver for IGBT or Mosfet modules
146 parts5 - 2 layers
- 4 layers100 × 100 mm
- 4 layers266.7 × 123.2 mm
