2 layers99 × 62 mm
2 layers100 × 62 mm
Fallblatt Controller
CatoLynx/KroneSplitFlapReplacementHardware and software for a custom split-flap controller for KRONE type D modules
- Size
- 100 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 37
- Pads
- 150
- Tracks, vias
- 334, 50
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20160815)
- Created
- 16 Jan 2019
- Updated
- 16 Jan 2019
Overview
Fallblatt Controller is an open-source printed circuit board by CatoLynx, from the CatoLynx/KroneSplitFlapReplacement repository on GitHub. It is a 2-layer board of 100 × 62 mm with 39 parts on 37 nets, routed with 334 tracks and 50 vias.
It is built around the ATMEGA328P-AU, MAX485ED and BC817-40, with the DM-08-V and MOC3081M among its other parts. Its parts include 8 resistors, 4 connectors, 3 capacitors, 3 diodes and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICs
BC817-40
SOT-23-65℃~+150℃ 1 NPN 100MHz 100nA 250 345mW 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)DM-08-V
SMD-16P,6.2x21.3mmSMD-16P,6.2x21.3mm New Arrivals ROHSDiptronicsUncategorised
MOC3081M
DIP-6-40℃~+85℃ 1 1.5V 1500V/us 150mA 30mA 7.5kV 800V TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 180R | Resistors_SMD:R_0603 | R2, R6, R7 |
| 2 | 100n | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | 4.7k | Resistors_SMD:R_0603 | R4, R8 |
| 2 | BC817-40 | TO_SOT_Packages_SMD:SOT-23 | Q2, Q3 |
| 1 | 10k | Resistors_SMD:R_0603 | R1 |
| 1 | 150R | Resistors_SMD:R_0603 | R5 |
| 1 | 42V AC | custom:AKL330-2 | P4 |
| 1 | 47u | Capacitors_SMD:CP_Elec_6.3x5.3 | C3 |
| 1 | 68R | Resistors_SMD:R_0603 | R3 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | BT134W-600.135 | TO_SOT_Packages_SMD:SOT-223 | D1 |
| 1 | DM-08-V | custom:SW_DIP_x8_SMD | SW1 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_SMT_02x03 | P1 |
| 1 | Impuls | custom:Photointerrupter_QRE1113_SMD_Across_Hole_Mirrored | D3 |
| 1 | Interface | custom:IDC_2x03_Angled | P3 |
| 1 | LOGO | custom:cato | G*** |
| 1 | LOGO | custom:cato_small | G*** |
| 1 | MAX485 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | MOC3081M | custom:Optocoupler_SMD_6pin | Q1 |
| 1 | Motor | custom:NXW-02SMDK | P2 |
| 1 | Nullposition | custom:Photointerrupter_QRE1113_SMD_Across_Hole | D2 |
| 1 | SolderBridge_x8_SMD | custom:SolderBridge_x8_SMD | SJ1 |
| 1 | ZTTCC8.00MG | custom:Resonator_ZTTCC_X.XX_MG | Y1 |
The 28 most common of 39 parts.
Questions
How big is the Fallblatt Controller PCB?
It measures 100 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fallblatt Controller use?
39 parts, built around the ATMEGA328P-AU, MAX485ED, BC817-40 and DM-08-V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fallblatt Controller KiCad files?
From the CatoLynx/KroneSplitFlapReplacement repository on GitHub, at the commit this page was made from: the board is KRONE_Controller/Hardware/Fallblatt-Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fallblatt Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask CatoLynx before reusing the design.
Similar boards
- 2 layers100 × 45 mm
DMX PWM LED Driver
tpanajott/DMX512_LedDimmer
Wireless DMX512 controller with remote LED driver boards
57 parts4 - 2 layers80 × 30 mm
- 2 layers
MP Tracker
elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker
70 parts89 - 2 layers44.2 × 32.6 mm
Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44 - 11 layers74.2 × 29.2 mm
SolderingStationPCB
clytle374/Open-T12-Soldering-Station
This is a clone of the cheap T12 soldering stations, attempting to eliminate the shortfalls of the cheap designs.
68 parts43GPL-3.0 - 6 layers69.6 × 46.1 mm
Carrier
KaiPereira/CM5-SODIMM-Carrier
A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!
98 parts29 - 4 layers
IONPAK2
m-labs/ionpak
A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)
259 parts23