
Main project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Blind Spot Detector is an open-source printed circuit board by caslam, from the caslam/Blind-Spot-Detector repository on GitHub. It is a 4-layer board of 48 × 72 mm with 20 parts on 44 nets, routed with 97 tracks and 37 vias.
Its parts include 6 resistors and 1 connector. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 1 | Buzzer | Customs:Small_Buzzer | Buzzer |
| 1 | IMU_2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Lidar_1 | OPL_Connector:GROVE-HW4-2.0-90D | Lidar_1 |
| 1 | Lidar_2 | OPL_Connector:GROVE-HW4-2.0-90D | Lidar_2 |
| 1 | Lidar_3 | OPL_Connector:GROVE-HW4-2.0-90D | Lidar_3 |
| 1 | Teensy4.0 | teensy:Teensy40 | Teensy |
| 1 | ~ | Customs:HC-06_Module | HC-06 |
| 1 | ~ | Customs:MPU6050_Module | MPU6050 |
The 14 most common of 20 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32


RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.

dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!

macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP

It measures 48 × 72 mm and has 4 copper layers, 1.6 mm thick.
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the caslam/Blind-Spot-Detector repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask caslam before reusing the design.