
PDU
CASE-Lab/MARV-Hardware-Electrical
Led driver with integrated eFuse and PWM dimming in a MIDI fuse format. Provides undervoltage cutoff for battery protection and a low standby current of 30 uA.

Led driver with integrated eFuse and PWM dimming in a MIDI fuse format. Provides undervoltage cutoff for battery protection and a low standby current of 30 uA.
LED Driver is an open-source printed circuit board by CASE-Lab, from the CASE-Lab/MARV-Hardware-Electrical repository on GitHub, published under the CC-BY-4.0 licence. It is a 4-layer board of 42 × 13.6 mm with 27 parts on 19 nets, routed with 110 tracks and 85 vias.
It is built around the MIC1555YM5-TR, RB751S40T5G and 2N7002PW, with the DMP3013SFV among its other parts. Its parts include 10 resistors, 5 diodes, 4 capacitors, 3 connectors and 2 ICs.
Led driver with integrated eFuse and PWM dimming in a MIDI fuse format. Provides undervoltage cutoff for battery protection and a low standby current of 30 uA.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R6, R9 |
| 2 | 0.1 uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1.5M | Resistor_SMD:R_0603_1608Metric | R2, R5 |
| 2 | Conn_01x01 | MountingHole:MountingHole_5.5mm_Pad_Via | J1, J2 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D5 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | RB751S40T5G | Diode_SMD:D_SOD-523 | D2, D3 |
| 1 | 100k | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 130k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 2.2uF 16V | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 2N7002PW | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | ? | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | Conn_01x02 | local:Molex_Micro-Lock_5055680271_1x02_P1.25_Vertical | J3 |
| 1 | DMP3013SFV | Package_SON:Diodes_PowerDI3333-8 | Q2 |
| 1 | D_TVS | Diode_SMD:D_SMB | D4 |
| 1 | MIC1555YM5-TR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | TPS25940x-Q1 | Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm_ThermalVias | U2 |

CASE-Lab/MARV-Hardware-Electrical
Led driver with integrated eFuse and PWM dimming in a MIDI fuse format. Provides undervoltage cutoff for battery protection and a low standby current of 30 uA.

oskarengdahl/Elita-electrical-system
A project for the electrical system for Elita, the Joker S30 sailboat.


Resaj/time2time
Chronometer with partials measurement for the line-following competitions


TheColonelYoung/RingOne
3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871.



It measures 42 × 13.6 mm and has 4 copper layers, 1.6 mm thick.
27 parts, built around the MIC1555YM5-TR, RB751S40T5G, 2N7002PW and DMP3013SFV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CASE-Lab/MARV-Hardware-Electrical repository on GitHub, at the commit this page was made from: the board is CCU - Combined Control Unit/KiCad/LED-Driver/LED-Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).