
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

RasPi NFC Audio KiCAD is an open-source printed circuit board by carrola1, from the carrola1/RasPi_NFC_Audio_PCB repository on GitHub. It is a 2-layer board of 103.5 × 65 mm with 84 parts on 98 nets, routed with 894 tracks and 128 vias.
It is built around the FXL6408UMX, DMG1012T-7 and M2.5. Its parts include 31 resistors, 26 capacitors, 6 connectors, 4 ICs and 4 transistors. It belongs with the audio and music and radio and wireless boards of this library.
RasPi_NFC_Audio_PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R5, R20, R21, R22, R23, R28, R29, R31 |
| 9 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10, C11, C12, C13, C14, C15, C24, C25, C29 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C8, C9, C16, C26, C27 |
| 6 | TestPoint | TestPoint:TestPoint_Keystone_5019_Minature | TP1, TP2, TP5, TP6, TP7, TP8 |
| 5 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R18, R19, R30 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R13, R14, R15 |
| 4 | 121 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R24, R25, R26, R27 |
| 4 | DMG1012T-7 | RasPi_NFC_Audio_PCB_Lib:SOT-523 | Q1, Q2, Q3, Q4 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 1.5 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R9 |
| 2 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C22, C23 |
| 2 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C28 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16, R17 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19, C20 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C18, C21 |
| 2 | 33p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C7 |
| 2 | 560n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2 |
| 2 | MAX98357 | RasPi_NFC_Audio_PCB_Lib:QFN50P300X300X80-17N | U3, U4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J4, J5 |
| 1 | 1.6k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 1000p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C17 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J6 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | FXL6408UMX | RasPi_NFC_Audio_PCB_Lib:QFN40P260X180X55-16N | U5 |
| 1 | Oscillator | RasPi_NFC_Audio_PCB_Lib:OSCCC500X320X105N | Y1 |
| 1 | PN532 | RasPi_NFC_Audio_PCB_Lib:HVQFN40-6X6 | U2 |

doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.


perc-sw/phyduino_pico2
CAD files for the student workshop Phyduino Pico2 Arduino IDE compatible board.



sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s

QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

antmicro/lpddr4-test-board
Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM
It measures 103.5 × 65 mm and has 2 copper layers, 1.6 mm thick.
84 parts, built around the FXL6408UMX, DMG1012T-7 and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the carrola1/RasPi_NFC_Audio_PCB repository on GitHub, at the commit this page was made from: the board is RasPi_NFC_Audio_KiCAD/RasPi_NFC_Audio_KiCAD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask carrola1 before reusing the design.