2 layers69.2 × 20.3 mm
RingPush PMOD
carlosedp/PMOD1
Documentation and code samples for the PMOD1 - Rotary+RingLED
39 parts4BSD-3-Clause
2 layers69.2 × 20.3 mm
RingPush PMOD
carlosedp/PMOD14Documentation and code samples for the PMOD1 - Rotary+RingLED
- Size
- 69.2 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 32
- Pads
- 105
- Tracks, vias
- 296, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Apr 2021
- Updated
- 14 Sep 2022
Overview
RingPush PMOD is an open-source printed circuit board by carlosedp, from the carlosedp/PMOD1 repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 69.2 × 20.3 mm with 41 parts on 32 nets, routed with 296 tracks and 40 vias.
It is built around the 74HC595. Its parts include 16 diodes, 14 resistors, 2 capacitors, 2 transistors and 1 IC.
Main components
1README
Readme.mdPMOD1 - RingPush module
This repository hosts all data related to PMOD1, a PMOD module with a LED ring and a rotary encoder with push button. Always use the latest version of the PCB.
PCB 3D View:
Schematic
BOM
| Id | Designator | Package | Quantity | Designation |
|---|---|---|---|---|
| 1 | U1 | SOIC-16_3.9x9.9mm_P1.27mm | 1 | 74HC595 |
| 2 | PMOD1 | pmod_pin_array_6x2 | 1 | PMOD-Device-x2-Type-1A-GPIO |
| 3 | SW1 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | 1 | Rotary_Encoder_Switch |
| 4 | R1,R2,R12,R13,R14,R16,R17,R18 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | 8 | 4.7k |
| 5 | C1,C2 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | 2 | 100n |
| 6 | D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15,D16 | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | 16 | LED_ALT |
| 7 | R3,R4,R5,R6,R7,R8,R9,R10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | 8 | 220R |
| 8 | Q1,Q2 | SOT-23 | 2 | 2N7002 |
The repository has the following data:
- Kicad project with schematic and PCB
- Arduino sample implemented on the NodeMCU board showing the encoder and rindLED functionality
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | LED_ALT | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 8 | 220R | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 6 | 4.7k | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R16, R17, R18 |
| 3 | , , | ||
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | LOGO | library:PMOD1-QRCodeBlack | G*** |
| 1 | PMOD-Device-x2-Type-1A-GPIO | PMOD:pmod_pin_array_6x2_hs | PMOD1 |
| 1 | Rotary_Encoder_Switch | CarlosEDP_Lib:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
More from carlosedp/PMOD1
1Similar boards
- 2 layers45.7 × 31.8 mm
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers228.6 × 100 mm
Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers245.1 × 160 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers100 × 95.1 mm
Protoboard-6x4-breakout
electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts
4,745 parts311CC-BY-4.0 - 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 2 layers100.5 × 218.3 mm
- 2 layers287.8 × 126.7 mm
- 2 layers100 × 100 mm
Questions
How big is the RingPush PMOD PCB?
It measures 69.2 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RingPush PMOD use?
41 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RingPush PMOD KiCad files?
From the carlosedp/PMOD1 repository on GitHub, at the commit this page was made from: the board is Kicad-RingPush/V1/RingPush-PMOD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RingPush PMOD design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).