4 layers89.5 × 121.6 mm
2 layers127 × 120.6 mm
BeagleBoy
CapelessCrusaders/BeagleBoy9This project is an entry in the Texas Instruments Intern Design Challenge 2013. It is a cape for the BeagleBone Black which turns the BBB into a handheld gaming console with the addition of an LCD cape stacked on top or…
- Size
- 127 × 120.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 24
- Pads
- 243
- Tracks, vias
- 500, 34
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 17 Jul 2013
- Updated
- 23 Jul 2013
Overview
BeagleBoy is an open-source printed circuit board by CapelessCrusaders, from the CapelessCrusaders/BeagleBoy repository on GitHub. It is a 2-layer board of 127 × 120.6 mm with 48 parts on 24 nets, routed with 500 tracks and 34 vias.
It is built around the TPS61032PWP. Its parts include 17 resistors, 13 switches, 10 connectors, 3 capacitors and 2 diodes.
Main components
1README
READMEThis project is an entry in the Texas Instruments Intern Design Challenge 2013. It is a cape for the BeagleBone Black which turns the BBB into a handheld gaming console with the addition of an LCD cape stacked on top or a controller when connected to an HDMI monitor.
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K | 1206_resistor | R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 10 | SPST | SNES_switch | SW1, SW2, SW3, SW5, SW6, SW7, SW9, SW10, SW11, SW12 |
| 6 | 33MM_PAD | 33mm_pad | J5, J6, J7, J8, J9, J10 |
| 2 | 10uF | 0805cap | C1, C2 |
| 2 | 23X2 | SSHQ-123-D-**-F-LF | J3, J4 |
| 2 | 2AA_BATT | BH2AAPC | J1, J2 |
| 2 | SPST_EVQ | EVQ-PUL02K | SW4, SW8 |
| 1 | 0 | 1206_resistor | R4 |
| 1 | 1.74M | 1206_resistor | R2 |
| 1 | 180K | 1206_resistor | R1 |
| 1 | 47uF | 1206CAP | C3 |
| 1 | 510 | 1206_resistor | R3 |
| 1 | 6.8uH | WE-PD | L1 |
| 1 | DIODE_SHOTTKEY | PMEG1020EJ | D1 |
| 1 | LED | LTST-C171KGKT | D2 |
| 1 | LOGO | LOGO | G*** |
| 1 | SPDT | MHSS1104 | SW13 |
| 1 | TPS61032PWP | TPS61032PWP | U1 |
Questions
How big is the BeagleBoy PCB?
It measures 127 × 120.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BeagleBoy use?
48 parts, built around the TPS61032PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BeagleBoy KiCad files?
From the CapelessCrusaders/BeagleBoy repository on GitHub, at the commit this page was made from: the board is BeagleBoy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BeagleBoy design in my own project?
Its repository states no licence, so its author keeps all rights: ask CapelessCrusaders before reusing the design.
Similar boards
- 2 layers90.2 × 95.9 mm
- 2 layers40 × 79.6 mm
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
48 parts915 - 2 layers
Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers18.8 × 18.1 mm
- 2 layers48.1 × 115.6 mm
- 2 layers106 × 55 mm
Endcap
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
48 parts384 - 2 layers42.8 × 88 mm
18650 pcb
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
48 parts253GPL-3.0