cameronhotchkies/SputterizerSynthesizer Module
Sputterizer is an open-source printed circuit board by cameronhotchkies, from the cameronhotchkies/Sputterizer repository on GitHub. It is a 2-layer board of 46 × 110 mm with 44 parts on 56 nets, routed with 336 tracks and 45 vias.
It is built around the NE5532, CD4013BE and SJ1-3535, with the BS170 among its other parts. Its parts include 10 resistors, 9 capacitors, 7 diodes, 5 connectors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Signal Generator for Eurorack Synthesizers https://www.greenfacelabs.com/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SB120 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 3 | 100nF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C2, C4, C5 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C3, C6 |
| 3 | 10K | panel:Potentiometer_Bourns_PTD901_Single_Horizontal | RV1, RV2, RV3 |
| 3 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3 |
| 3 | SJ1-3535 | sputterizer:Jack_3.5mm_CUI_SJ1-3535NG_Horizontal_RectangularHoles | J1, J2, J3 |
| 2 | 10.0K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | 100nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C8, C9 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | NE5532 | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7 |
| 1 | 140K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 15.8K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 17.8K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 20K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 2X8 Header | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BS170 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1 |
| 1 | CD4013BE | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92L_Inline_Wide | U4 |
| 1 | LED | LED_THT:LED_D3.0mm | D7 |
| 1 | TestPoint | TestPoint:TestPoint_Keystone_5005-5009_Compact | TP1 |
It measures 46 × 110 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the NE5532, CD4013BE, SJ1-3535 and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cameronhotchkies/Sputterizer repository on GitHub, at the commit this page was made from: the board is main_board/sputterizer/sputterizer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cameronhotchkies before reusing the design.
shannon-greenlight/spankulator
The Spankulator is a WiFi-enabled multi-function Eurorack module. Its main function is to generate a trio of coordinated analog and digital signals which can be used in an endless variety of ways.
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
