2 layers90 × 60 mm
2 layers121.2 × 63.4 mm
CameraPowerAdapter
camelNote/CameraPowerAdapter- Size
- 121.2 × 63.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 46
- Pads
- 325
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Sep 2026
- Updated
- 28 Oct 2026
Overview
CameraPowerAdapter is an open-source printed circuit board by camelNote, from the camelNote/CameraPowerAdapter repository on GitHub. It is a 2-layer board of 121.2 × 63.4 mm with 76 parts on 46 nets.
It is built around the LT8390EFE#PBF, LTC4417IGN#TRPBF and NCEP40T11G, with the IRF7324 among its other parts. Its parts include 29 capacitors, 18 resistors, 6 transistors, 3 ICs and 3 diodes.
Main components
4
LT8390EFE#PBF
TSSOP-28-EP-40℃~+125℃@(TJ) 0V~60V 1 150kHz~650kHz 1uA 4V~60V Adjustable Buck-Boost Buck-Boost External Yes TSSOP-28-EP DC-DC Converters ROHSAnalog DevicesDC-DC Converters
LTC4417IGN#TRPBF
SSOP-24-150mil-40℃~+85℃ 2.5V~36V 3 Active High Overvoltage protection、Soft-start、Under-voltage lockout、Reverse voltage protection、Overcurrent Protection、Reverse current blocking SSOP-24-150mil ORing Controllers ROHSAnalog DevicesPower Distribution SwitchesNCEP40T11G
DFN5X6-8L-55℃~+150℃ 1 N-channel 110A 1nF 2.2V 3.9mΩ@4.5V 4.2nF 40V 72nC@10V 75W 78pF N-Channel DFN5X6-8L MOSFETs ROHSWuxi NCE Power SemiconductorMOSFETs
IRF7324
SOP-8-150milUncategorisedInfineon Technologies
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C9, C10, C17, C18, C26, C27 |
| 8 | 10u | Capacitor_SMD:C_0603_1608Metric | C11, C12, C13, C14, C19, C20, C21, C22 |
| 7 | MountingHole_Pad | footprints:MG_ThermalTab_M3 | A1, GND, GND, In1+, In2+, Out-, Out+ |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | NCEP40T11G | easyeda2kicad:DFN-8_L5.1-W5.7-P1.27-LS6.1-BL | Q3, Q4, Q5, Q6 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C24, C28 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R7 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R17, R30 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | 2200u | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C6, C7 |
| 2 | Fuse | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1, F2 |
| 2 | Heatsink_Pad | easyeda2kicad:Heatsink_20x20x10_XSD271-294 | HS1, HS2 |
| 2 | IRF7324 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 2 | Schottky | Diode_SMD:D_0805_2012Metric | D5, D6 |
| 1 | 100u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10uH | Inductor_THT:Choke_EPCOS_B82722A | L1 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 12m | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 15n | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 180u | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 1M | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1N914 | Diode_SMD:D_SOD-523 | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 220u | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C29 |
| 1 | 226k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 2m | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 365k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 499k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 56.2k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | L | Inductor_SMD:L_Sunlord_MWSA1205S-470 | L2 |
| 1 | LM2596SX-5.0/NOPB | easyeda2kicad:TO-263-5_L10.2-W8.9-P1.70-TL | U3 |
| 1 | LT8390EFE#PBF | easyeda2kicad:TSSOP-28_L9.7-W4.4-P0.65-LS6.4-BL-EP | U1 |
| 1 | LTC4417IGN#TRPBF | easyeda2kicad:SSOP-24_L8.8-W4.0-P0.64-LS6.2-BL | U2 |
Questions
How big is the CameraPowerAdapter PCB?
It measures 121.2 × 63.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CameraPowerAdapter use?
76 parts, built around the LT8390EFE#PBF, LTC4417IGN#TRPBF, NCEP40T11G and IRF7324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CameraPowerAdapter KiCad files?
From the camelNote/CameraPowerAdapter repository on GitHub, at the commit this page was made from: the board is PCB/CameraPowerAdapter.kicad_pcb and its schematic PCB/CameraPowerAdapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CameraPowerAdapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask camelNote before reusing the design.
Similar boards
- 2 layers75 × 93 mm
- 10 layers470 × 346.5 mm
- 2 layers149.3 × 87.9 mm
- 2 layers48 × 107 mm
- 2 layers85 × 115 mm
OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers77 × 97 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
76 parts1kGPL-3.0 - 2 layers137.9 × 92.7 mm
ErgoTravel
jpconstantineau/ErgoTravel
A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox
76 parts284MIT