2 layers60 × 50 mm
2 layers73.7 × 76.8 mm
Incinerator
cadus/incinerator2Control module for CADUS medical waste incinerator
- Size
- 73.7 × 76.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 37
- Pads
- 139
- Tracks, vias
- 246, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Jun 2020
- Updated
- 27 Jun 2021
Overview
Incinerator is an open-source printed circuit board by cadus, from the cadus/incinerator repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 73.7 × 76.8 mm with 44 parts on 37 nets, routed with 246 tracks and 3 vias.
It is built around the IRLU120NPBF. Its parts include 15 resistors, 10 diodes, 8 connectors, 5 transistors and 4 ICs. It belongs with the ESP32 and ESP8266 boards of this library.
Main components
1README
README.mdFirmware & electronics for the CADUS incinerator
Furnace for the incineration of medical waste.
Project documentation on GitHub pages
Under construction / Work in progress
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100 | incinerator:R_THT_D2.5mm_P7.62mm_Custom | R4, R8, R11, R13, R18 |
| 5 | 15k | incinerator:R_THT_D2.5mm_P7.62mm_Custom | R3, R6, R7, R10, R17 |
| 5 | 1k | incinerator:R_THT_D2.5mm_P7.62mm_Custom | R1, R2, R5, R9, R16 |
| 5 | D | incinerator:D_DO-41_P7.62mm_Custom | D1, D2, D4, D6, D11 |
| 5 | IRLU120N | incinerator:SIPAK_Vertical_Custom | Q1, Q2, Q3, Q4, Q6 |
| 5 | RED | incinerator:LED_D3.0mm_Custom | D3, D5, D7, D8, D12 |
| 2 | Adafruit_MAX31855 | incinerator:Adafruit_MAX31855 | U3, U4 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | AIRPMP | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | IGNITION_AFT | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | IGNITION_MAIN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | NodeMCU_ESP32 | incinerator:ESP32_NodeMCU | U2 |
| 1 | Power Source 12V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | R-7890-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | To Display | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | To Encoder | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | VALVE_AFT | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | VALVE_MAIN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
Questions
How big is the Incinerator PCB?
It measures 73.7 × 76.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Incinerator use?
44 parts, built around the IRLU120NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Incinerator KiCad files?
From the cadus/incinerator repository on GitHub, at the commit this page was made from: the board is pcb/incinerator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Incinerator design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers78 × 60 mm
- 2 layers115 × 14.5 mm
- 2 layers37.7 × 20 mm
- 2 layers88.9 × 88.4 mm
- 2 layers125 × 98 mm
3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm
RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm
Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0