4 layers115 × 234.4 mm
2 layers59 × 48 mm
Ethrottle pcb
cadavis2025/ethrottle-pcb- Size
- 59 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 34
- Pads
- 140
- Tracks, vias
- 358, 56
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Oct 2022
- Updated
- 6 Nov 2024
Overview
Ethrottle pcb is an open-source printed circuit board by cadavis2025, from the cadavis2025/ethrottle-pcb repository on GitHub. It is a 2-layer board of 59 × 48 mm with 51 parts on 34 nets, routed with 358 tracks and 56 vias.
It is built around the MCP6004-E/P, UB2-5NUN and VLMO1500-GS08, with the TC33X-2-103E, ATM15-08PA-BM02 and ZXTR2105F-7-52 among its other parts. Its parts include 20 resistors, 13 diodes, 6 capacitors, 3 ICs and 2 transistors.
Main components
6
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
UB2-5NUN
SMD,10.6x5.7mm-40℃~+85℃ 100mΩ 140mW 178Ω 1A 1ms 220V@DC、250V@AC 2ms 300mA@110VDC、500mA@125VAC、1A@30VDC 5V Silver Alloy Two groups of conversions: 2C(Double-pole double-throw conversion) SMD,10.6x5.7mm Signal Relays ROHSKEMETSignal Relays
VLMO1500-GS08
0402-30℃~+85℃ 130° 20mA 2V 605nm 611nm 75mW 90mcd Discrete Diode Orange 0402 LED Indication - Discrete ROHSVishay IntertechnologyLED Indication - Discrete
TC33X-2-103E
SMD-3P,3.8x3.6mm1 10kΩ 150mW ±25% ±250ppm/℃ SMD-3P,3.8x3.6mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable Resistors
ATM15-08PA-BM02
插件Wire To Board ConnectorAmphenol
ZXTR2105F-7-52
SOT-23-3-65℃~+150℃@(Tj) 1 46dB@(100Hz) 5V 60V 800uA 89mA Fixed Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdFALSTAD Link
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | CGRM4007-G | Diode_SMD:D_SOD-123 | D7, D8, D11, D12, D13, D14, D15, D16 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R13, R14, R17, R19, R22 |
| 5 | VLMO1500-GS08 | LED_SMD:LED_0402_1005Metric | D1, D2, D3, D4, D17 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R23, R27 |
| 2 | MCP6004 | MCP6004T-I_ST:SOP65P640X120-14N | U1, U3 |
| 2 | TC33X-2-103E | TC33X-2-103E:TRIM_TC33X-2-103E | R1, R6 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 102k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 11.3k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 39k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | ATM15-08PA-BM02 | ATM15-08PA-BM02:ATM1508PABM02 | J1 |
| 1 | BREF-Test | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP2 |
| 1 | DDTC124XCA-7-F | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | TREF-Test | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP1 |
| 1 | UB2-5NUN | UB2-5NUN:UB2-5NUN | U4 |
| 1 | ZXTR2105F-7 | ZXTR2105F-7:ZXTR2105F-7 | Q1 |
Similar boards
- 4 layers60 × 110 mm
- 2 layers177.4 × 202.8 mm
MQ Breakout
SolderedElectronics/Air-quality-sensor-MQ135-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Air-quality-sensor-MQ135-breakout designed by Soldered Electronics.
1,564 parts7 - 2 layers71.8 × 40.8 mm
- 2 layers210 × 109 mm
Capacitive soil sensor panel
SolderedElectronics/Capacitive-soil-sensor-hardware-design
Hardware design, BOM, gerbers and 3D files for Capacitive-soil-sensor designed by Soldered Electronics.
372 parts3 - 2 layers93.1 × 65.5 mm
Butterfly
mignon-p/butterfly-hw
KiCad and Gerber files for a nightlight shaped like a butterfly.
30 parts2CC-BY-SA-4.0 - 2 layers42 × 20 mm
- 4 layers222 × 100 mm
HydroScan V1
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
156 parts1
Questions
How big is the Ethrottle pcb PCB?
It measures 59 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ethrottle pcb use?
51 parts, built around the MCP6004-E/P, UB2-5NUN, VLMO1500-GS08 and TC33X-2-103E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethrottle pcb KiCad files?
From the cadavis2025/ethrottle-pcb repository on GitHub, at the commit this page was made from: the board is ethrottle_pcb.kicad_pcb and its schematic ethrottle_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethrottle pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask cadavis2025 before reusing the design.