4 layers115 × 234.4 mm
2 layers59 × 48 mm
Ethrottle pcb
cadavis2025/ethrottle-pcb- Size
- 59 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 34
- Pads
- 140
- Tracks, vias
- 358, 56
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Oct 2022
- Updated
- 6 Nov 2024
Overview
Ethrottle pcb is an open-source printed circuit board by cadavis2025, from the cadavis2025/ethrottle-pcb repository on GitHub. It is a 2-layer board of 59 × 48 mm with 51 parts on 34 nets, routed with 358 tracks and 56 vias.
It is built around the MCP6004-E/P, UB2-5NUN and VLMO1500-GS08, with the TC33X-2-103E, ATM15-08PA-BM02 and ZXTR2105F-7-52 among its other parts. Its parts include 20 resistors, 13 diodes, 6 capacitors, 3 ICs and 2 transistors.
Main components
6
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
UB2-5NUN
SMD,10.6x5.7mm-40℃~+85℃ 100mΩ 140mW 178Ω 1A 1ms 220V@DC、250V@AC 2ms 300mA@110VDC、500mA@125VAC、1A@30VDC 5V Silver Alloy Two groups of conversions: 2C(Double-pole double-throw conversion) SMD,10.6x5.7mm Signal Relays ROHSKEMETSignal Relays
VLMO1500-GS08
0402-30℃~+85℃ 130° 20mA 2V 605nm 611nm 75mW 90mcd Discrete Diode Orange 0402 LED Indication - Discrete ROHSVishay IntertechnologyLED Indication - Discrete
TC33X-2-103E
SMD-3P,3.8x3.6mm1 10kΩ 150mW ±25% ±250ppm/℃ SMD-3P,3.8x3.6mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable Resistors
ATM15-08PA-BM02
插件Wire To Board ConnectorAmphenol
ZXTR2105F-7-52
SOT-23-3-65℃~+150℃@(Tj) 1 46dB@(100Hz) 5V 60V 800uA 89mA Fixed Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdFALSTAD Link
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | CGRM4007-G | Diode_SMD:D_SOD-123 | D7, D8, D11, D12, D13, D14, D15, D16 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R13, R14, R17, R19, R22 |
| 5 | VLMO1500-GS08 | LED_SMD:LED_0402_1005Metric | D1, D2, D3, D4, D17 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R23, R27 |
| 2 | MCP6004 | MCP6004T-I_ST:SOP65P640X120-14N | U1, U3 |
| 2 | TC33X-2-103E | TC33X-2-103E:TRIM_TC33X-2-103E | R1, R6 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 102k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 11.3k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 39k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | ATM15-08PA-BM02 | ATM15-08PA-BM02:ATM1508PABM02 | J1 |
| 1 | BREF-Test | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP2 |
| 1 | DDTC124XCA-7-F | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | TREF-Test | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP1 |
| 1 | UB2-5NUN | UB2-5NUN:UB2-5NUN | U4 |
| 1 | ZXTR2105F-7 | ZXTR2105F-7:ZXTR2105F-7 | Q1 |
Questions
How big is the Ethrottle pcb PCB?
It measures 59 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ethrottle pcb use?
51 parts, built around the MCP6004-E/P, UB2-5NUN, VLMO1500-GS08 and TC33X-2-103E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethrottle pcb KiCad files?
From the cadavis2025/ethrottle-pcb repository on GitHub, at the commit this page was made from: the board is ethrottle_pcb.kicad_pcb and its schematic ethrottle_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethrottle pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask cadavis2025 before reusing the design.
Similar boards
- 4 layers60 × 110 mm
- 2 layers177.4 × 202.8 mm
MQ Breakout
SolderedElectronics/Air-quality-sensor-MQ135-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Air-quality-sensor-MQ135-breakout designed by Soldered Electronics.
1,564 parts7 - 2 layers71.8 × 40.8 mm
- 2 layers210 × 109 mm
Capacitive soil sensor panel
SolderedElectronics/Capacitive-soil-sensor-hardware-design
Hardware design, BOM, gerbers and 3D files for Capacitive-soil-sensor designed by Soldered Electronics.
372 parts3 - 2 layers93.1 × 65.5 mm
Butterfly
mignon-p/butterfly-hw
KiCad and Gerber files for a nightlight shaped like a butterfly.
30 parts2CC-BY-SA-4.0 - 2 layers42 × 20 mm
- 4 layers222 × 100 mm
HydroScan V1
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
156 parts1