2 layers161.5 × 90.2 mm
Master
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
117 partsMIT
2 layers
Noname
cactorium/UCFBrainStuffEEG software, alpha stages. Will be opensourced when it's working!
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 8
- Pads
- 40
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 14 Dec 2014
- Updated
- 2 Oct 2015
Overview
Noname is an open-source printed circuit board by cactorium, from the cactorium/UCFBrainStuff repository on GitHub, published under the MIT licence. It is a 2-layer board with 10 parts on 8 nets.
It is built around the TPS62133RGT. Its parts include 4 capacitors, 1 resistor, 1 IC, 1 connector and 1 inductor.
Main components
1README
README.mdUCFBrainStuff
UCF senior design project, schematic files and other things. Will be open sourced at some point probably! All work is currently done in KiCAD but it may be converted to a different EDA software
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1pin | Connect:1pin | -BATT, +BATT |
| 1 | 0.1u | Capacitors_SMD:C_0805 | C2 |
| 1 | 100k | Resistors_SMD:R_0603 | R1 |
| 1 | 10u | Capacitors_SMD:C_0805 | C1 |
| 1 | 22u | Capacitors_SMD:C_0805 | C4 |
| 1 | 22u | custom_footprints:Coilcraft_XFL4020 | L1 |
| 1 | 3.3n | Capacitors_SMD:C_1206 | C3 |
| 1 | TPS62133 | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm | U1 |
| 1 | USB | Connect:USB_A | J1 |
Questions
What parts does the Noname use?
10 parts, built around the TPS62133RGT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Noname KiCad files?
From the cactorium/UCFBrainStuff repository on GitHub, at the commit this page was made from: the board is seniordesign/voltage_regulator/noname.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Noname design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from cactorium/UCFBrainStuff
6- 2 layers83.5 × 61.8 mm
Sensors
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
41 partsMIT - 2 layers47.3 × 32.6 mm
Flasher
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
40 partsMIT - 2 layers40.4 × 54.2 mm
Servos
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
22 partsMIT - 2 layers43.4 × 28.8 mm
Flasher
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
20 partsMIT - 2 layers33.7 × 34.9 mm
Voltage regulator
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
14 partsMIT
Similar boards
- 2 layers
- 4 layers100 × 100 mm
LED Panel Controller
drewsum/LED_Panel_Controller
Controls a single 64x64 HUB75E LED Panel
590 parts2GPL-3.0 - 4 layers105.4 × 88.9 mm
- 4 layers50 × 50 mm
- 2 layers93.3 × 97.2 mm
- 2 layers190 × 152 mm
- 2 layers190 × 152 mm
- 4 layers80 × 45 mm
SUMEC MK IV
bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.
122 parts3