Skip to the content
2 layers127.4 × 80.5 mmAvionics Power Regulation Board, the printed circuit board in 3D

Avionics Power Regulation Board

cacortes694/Avionics-Power-Regulation-Board

Power Regulation Board for the Fresno State SLI Full Scale Avionics Bay

Size
127.4 × 80.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
30
Pads
128
Tracks, vias
242, 17
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
2 Dec 2024
Updated
4 Jan 2025

Overview

Avionics Power Regulation Board is an open-source printed circuit board by cacortes694, from the cacortes694/Avionics-Power-Regulation-Board repository on GitHub. It is a 2-layer board of 127.4 × 80.5 mm with 43 parts on 30 nets, routed with 242 tracks and 17 vias.

It is built around the LM2576HVS-5, BK-18650-PC8 and EEU-TA1V102B, with the RC-10 among its other parts. Its parts include 14 capacitors, 12 resistors, 3 transistors, 2 ICs and 2 diodes.

Main components

4

README

README.md

Power Regulation Board for the Fresno State SLI Full Scale Avionics Bay

Parts

43
QtyValueFootprintReferences
7100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4, RC1, RC2, RC3, RC4, RC5
71uFCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC6, CAP1, CC1, CC2, CC3, CC4, CC5
30.1uFCapacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mmC3, C4, C5
31MOhmResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R8, R9
210kOhmResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R7
2MountingHoleMountingHole:MountingHole_2.1mmH1, H2
2NMOSBS170_2:TO92Q1, Q3
110uFCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC8
11N5822Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRF1
120mResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRSNS1
14.7uFCapacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mmC7
1BK-18650-PC8BK-18650-PC8:BAT_BK-18650-PC8BT1
1BQ76920PWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1Conn_01x05_SocketConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1DDiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD3
1EEUFR1V101BCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC1
1EEUTA1V102Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mmC2
1LM2576HVS-5Package_TO_SOT_SMD:TO-263-5_TabPin3U1
1LOGOAIAA Logo 2:AIAA LogoG***
1PMOSBS170_2:TO92Q2
1RC-10Inductor_THT:L_Radial_D6.0mm_P4.00mmL1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

The 42 most common of 43 parts.

More from cacortes694/Avionics-Power-Regulation-Board

1

Similar boards

  • 2 layers90 × 118 mmRoverbase, the printed circuit board in 3D

    Roverbase

    stephendade/roverbase

    A PCB design for Power and Motor control for small robots

    61 parts3GPL-3.0
  • 2 layers92 × 88 mmBattery Board, the printed circuit board in 3D

    Battery Board

    bluesatunsw/rocketry-datasat

    Cubesat-shaped data collection payload for Rocketry's Griffon rocket

    34 parts2GPL-3.0
  • 2 layers100 × 100 mmSpace Balloon, the printed circuit board in 3D

    Space Balloon

    TheEinfachFelix/Space_Balloon

    28 parts2
  • 2 layers160 × 100 mmADRmu battery, the printed circuit board in 3D

    ADRmu battery

    kitspace-test-repos/kicad6-file-collection

    82 partsMIT
  • 2 layers202.6 × 80 mmBlancing power, the printed circuit board in 3D

    Blancing power

    SagiK-Repository/Balancer

    balancer 만들기

    12 parts
  • 2 layers53.3 × 55.1 mmRPi Beam Profiler, the printed circuit board in 3D

    RPi Beam Profiler

    jameskeaveney/RPi-Beam-Profiler

    Automated laser beam profiler using Raspberry Pi

    12 parts24Apache-2.0
  • 2 layers109 × 95 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    93 parts4GPL-3.0
  • 4 layers95 × 56 mmJag v1, the printed circuit board in 3D

    Jag v1

    soerenmeier/jag-board

    Jag board is an attempt to make a pcb which can be used to control different kinds of rc vehicles. At first the focus will be on rc cars, which can be controlled via a web interface and a webcam.

    70 parts2Apache-2.0

Questions

How big is the Avionics Power Regulation Board PCB?

It measures 127.4 × 80.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Avionics Power Regulation Board use?

43 parts, built around the LM2576HVS-5, BK-18650-PC8, EEU-TA1V102B and RC-10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Avionics Power Regulation Board KiCad files?

From the cacortes694/Avionics-Power-Regulation-Board repository on GitHub, at the commit this page was made from: the board is Avionics Power Regulation Board/Avionics Power Regulation Board.kicad_pcb and its schematic Avionics Power Regulation Board/Avionics Instrumentation and Microcontroller/Avionics Instrumentation and Microcontroller Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Avionics Power Regulation Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask cacortes694 before reusing the design.