

F Stop DarkRoomTimer
Simple to build, simple to use "F-Stop" DarkRoom Timer with develop timer
- Size
- 121 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 60
- Pads
- 149
- Tracks, vias
- 320, 20
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jan 2026
- Updated
- 26 Feb 2026
Overview
F Stop DarkRoomTimer is an open-source printed circuit board by c1rk1, from the c1rk1/F-Stop_DarkRoomTimer repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 121 × 70 mm with 29 parts on 60 nets, routed with 320 tracks and 20 vias.
It is built around the SA10-21SRWA and 74AHC595D. Its parts include 10 resistors, 7 capacitors, 6 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdF-Stop DarkRoom Timer
Simple to build, simple to use "F-Stop" DarkRoom Timer.
- F-Stop-s 1/1, 1/2, 1/3, 1/4, 1/6, 1/12
- Strip expo feature - 3, 5, 7, 9 strips
- Zone expo feature, from 5 to 15 zones for dodge and burn
- develop timer feature - 1-900sec (15min)
F- stop printing was originally made popular by the award winning printer Gene Nocon in 1987.
Menu options:
- En.-t. : Enlarger timer
- dE.-t. : Develop timer
- SEt.t. : Set time
- F-St. : f-stop set
- Stri. : Strip
- Zone : Zone expo
En.-t. : Enlarger timer - set the desired value with the rotary encoder (the steps can be set in "F-St." menu) START/Pause with the "Pedal button". Sound will be played on lamp ON and lamp OFF. Default value after power up 10 sec. (you can change it in "SEt.t." menu).
dE.-t. : Develop timer - a simple count down timer in sec. from max 900 to 0 (default after power up 180sec/ 3min) Use rotary encoder to change the value, push long (1sec) to toggle between 1x/10x. Sound will play on begin and end. Start/pause with pedal button.
SEt.t. : Set time - of the enlarger timer start/begining value (0.1-10.0) default is 10 sec. Use the rotary encoder to change the value, short press to select and go back. This will have effect in "En.-t. : Enlarger timer" menu.
F-St. : f-stop set - set the steps what you want to use (1/1, 1/2, 1/3, 1/4, 1/6, 1/12 This will have effect in "En.-t. : Enlarger timer" and "Stri. : Strip" menu
Stri. : Strip - an easy way to create test strip. First set the estimated exprosure time in "En.-t. : Enlarger timer" menu then in the "Stri. : Strip" menu select the count of the strips you want (3, 5, 7, 9). It will display ex. "S.-5" from Strip-5. To procced, long press the rotary encoder and the display will show blinking number 1. If you are ready press pedal/START button and exprosure will be made, continue while all strip is done - according to the selected count. So for example 5. you will have 2 under exprosure and 2 over exprosure and in the middle the estimated value in "En.-t. : Enlarger timer" menu. Ex: you estimated 10sec in "En.-t. : Enlarger timer" menu and selected 1/2 F-Stops in "F-St. : f-stop" menu and S.-5 (five strips). This will be:
- strip = 5.0sec
- strip + 2.1sec to previous (total 7.1sec)
- strip + 2.9sec to previous (total 10.0sec - the middle, what you selected in "En.-t. : Enlarger timer" menu)
- strip + 4.1sec to previous (total 14.1sec)
- strip + 5.9sec to previous (total 20.0sec)
After developing the paper (use dE.-t. : Develop timer) select the best exprosure time what you can set it in "En.-t. : Enlarger timer" menu.
Zone : Zone expo is very similar in use to Strip menu but the Zones (sequences) can be select from 5-15. The total expo time will be the time selected in "En.-t. : Enlarger timer" menu and the steps will be F-Stops selected in "F-St. : f-stop" menu.
Example: you set 20sec in "En.-t. : Enlarger timer" menu and selected 1/2 F-Stops in "F-St. : f-stop" menu and Z.-5 (five zone). This will be:
- Zone = 5.0sec
- Zone + 2.1sec to previous (total 7.1sec)
- Zone + 2.9sec to previous (total 10.0sec)
- Zone + 4.1sec to previous (total 14.1sec)
- Zone + 5.9sec to previous (total 20.0sec)
The zones will help you to make dodge and burn on the print.
In the schematics I used big 1" 7-segment RED display with the 74HC595 shift registers connected to arduino 5,6,7 pins useing the ShiftDisplay library from Github. You can use any 7segment 4 digit red display what is compatible with the ShiftDisplay library.
Added support for Adafruit_LEDBackpack HT16K33 4 digit 14-Segment Display - use F-Stop_DarkRoomTimer14
- Rotary encoder connect to pins 2,3,4 and GND (A,B, button)
- START/PAUSE pedal/button connect to pin 8 and GND - simple push button or pedal or both
- Lamp controll relay board connect to pin 9 and GND - simple 5v relay board to controll the enlarger
- Piezo buzzer connect to pin 10 and GND on the arduino board.
TO DO list:
- expand dE.-t. : Develop timer to can select minutes with seconds or seconds only and add selectable tick sound for 10,20,30 sec to use for film developing and tick sound for flip inversion remainder.
Ver. 1.02
- Added Zone expo feature, from 5 to 15 zones for dodge and burn
Ver. 1.01
- Added 1/4 F-Stop
- Added 0.1 resolution for SEt.t. : Set time menu
- bug fixed when display showed 0.0 instead of 10.0 when e_time variable was 9.9999942
Ver. 1.00 - initial relase
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 330 | PCM_Resistor_SMD_AKL:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C6, C7 |
| 4 | SA10-21SRWA | footprints:SA10-21SRWA_KNB | U1, U2, U3, U4 |
| 2 | 22uF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C3, C4 |
| 2 | 74AHC595 | PCM_Package_SO_AKL:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 1 | 100 | PCM_Resistor_SMD_AKL:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 5K1 | PCM_Resistor_SMD_AKL:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 660 | PCM_Resistor_SMD_AKL:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | Arduino_Pro_Mini | PCM_arduino-library:Clone_Pro_Mini_Socket_NoSPH | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | LampRelayBoard | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Rotary Enc. | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Start Button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers201.9 × 109.2 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 4 layers100 × 100 mm

Flexible audio hub
andrew-bolin/flexible_audio_hub
My ears and speakers will last a lifetime (I hope), but home theatre audio standards do not. My old stereo amplifier works fine, why can't I get an HDMI upgrade module that gives it CEC (control via TV remote).
91 parts8 - 2 layers163.6 × 33.2 mm

CompactBeamspringP2
purdeaandrei/CompactBeamSpring
Compact Beamspring Controller, based on the TH Xwhatsit design
68 parts8 - 6 layers71 × 126 mm

QuasarSDR
petrinm/QuasarSDR-Hardware
Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.
454 parts7CERN-OHL-W-2.0 - 2 layers158.4 × 41.7 mm

SMDModelF
purdeaandrei/SMDModelFController
Model F controller, supports F AT, F122, F Unsaver, and "Blue Switch" keyboards.
45 parts6 - 4 layers233.4 × 147.3 mm

OpenPLC Hardware
gasiepgodoy/Open-Source-PLC
Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana
494 parts2 - 2 layers250 × 56 mm

Klock pcb
adriansalamon/clock-clock-24
Moved to https://git.salamon.xyz/adrian/clock-clock-24
45 parts1GPL-3.0
Questions
How big is the F Stop DarkRoomTimer PCB?
It measures 121 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the F Stop DarkRoomTimer use?
29 parts, built around the SA10-21SRWA and 74AHC595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F Stop DarkRoomTimer KiCad files?
From the c1rk1/F-Stop_DarkRoomTimer repository on GitHub, at the commit this page was made from: the board is Schematics/F-Stop_DarkRoomTimer.kicad_pcb and its schematic Schematics/F-Stop_DarkRoomTimer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the F Stop DarkRoomTimer design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).