c-/JumperTestquick and dirty test of doing sane 1-sided PCB's using a easy-to-add jumper symbol
JumperTest is an open-source printed circuit board by c-, from the c-/JumperTest repository on GitHub. It is a 2-layer board with 10 parts on 9 nets, routed with 57 tracks and 0 vias.
It is built around the ADS1015IDGS. Its parts include 7 connectors, 2 resistors and 1 IC.
quick and dirty test of doing sane 1-sided PCB's using a easy-to-add jumper symbol
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | J3, J4, J5, J6, J7 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | ADS1015IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J1 |
JunOllyLi/TX_PCB
NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.
proveskit/solar_boards
The solar panel boards for the PROVES Kit
proveskit/battery_board
The battery and power management board for the PROVES Kit.
Alex-C-EE/Reliable-Temp-Monitor
A CAN Node designed to take temperature measurement from 3 analog-output sensors and control 2x 24V fans
krishchan007/DUT_Interface_board_v0.2
v0.2 of DUT interface board with significant changes in layout, architecture etc.
10 parts, built around the ADS1015IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the c-/JumperTest repository on GitHub, at the commit this page was made from: the board is JumperTest.kicad_pcb and its schematic JumperTest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask c- before reusing the design.
