2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT
2 layers68 × 46 mm
Uart2pwm
Bytewerk/uart2pwmA device for controlling LEDs and Fans through an RS232 interface
- Size
- 68 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 67
- Pads
- 185
- Tracks, vias
- 358, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Mar 2015
- Updated
- 4 Apr 2015
Overview
Uart2pwm is an open-source printed circuit board by Bytewerk, from the Bytewerk/uart2pwm repository on GitHub. It is a 2-layer board of 68 × 46 mm with 63 parts on 67 nets, routed with 358 tracks and 14 vias.
It is built around the ATTINY2313A-SU and MAX232N. Its parts include 25 resistors, 17 connectors, 10 capacitors, 8 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY2313A-SU
SOIC-20-300mil-40℃~+85℃ 1.8V~5.5V 128Byte 128Byte 18 20MHz 2KB 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 120 | SMD_Packages:SMD-0603 | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 8 | 39 | SMD_Packages:SMD-0603 | R18, R19, R20, R21, R22, R23, R24, R25 |
| 6 | CAT | Pin_Headers:Pin_Header_Straight_1x01 | P3, P4, P7, P8, P13, P14 |
| 6 | MOSFET_P | SMD_Packages:SOT-23-GDS | Q1, Q2, Q4, Q5, Q7, Q8 |
| 4 | 1uF | Capacitors_SMD:C_0805 | C1, C2, C7, C8 |
| 2 | 100nF | SMD_Packages:SMD-0603 | C9, C10 |
| 2 | 22p | SMD_Packages:SMD-0603 | C3, C4 |
| 2 | LED_B_AN | Pin_Headers:Pin_Header_Straight_2x02 | P15, P16 |
| 2 | LED_G_AN | Pin_Headers:Pin_Header_Straight_2x02 | P9, P10 |
| 2 | LED_R_AN | Pin_Headers:Pin_Header_Straight_2x02 | P5, P6 |
| 2 | MOSFET_N | SMD_Packages:SOT-23-GDS | Q3, Q6 |
| 1 | 100uF | Capacitors_Elko_ThroughHole:Elko_vert_11.5x8mm_RM3.5 | C5 |
| 1 | 10k | SMD_Packages:SMD-0603 | R1 |
| 1 | 16 MHz | Crystals:Crystal_HC49-SD_SMD | X1 |
| 1 | 470uF | Capacitors_Elko_ThroughHole:Elko_vert_11.5x8mm_RM3.5 | C6 |
| 1 | ATTINY2313A-S | SMD_Packages:SO-20-L | IC1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P11 |
| 1 | CONN_01X04 | Connector:MOLEX_8981_4Pin | P1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | FAN0 | Pin_Headers:Pin_Header_Straight_1x03 | P12 |
| 1 | FAN1 | Pin_Headers:Pin_Header_Straight_1x03 | P17 |
| 1 | MAX232 | Sockets_DIP:DIP-16__300 | U1 |
Questions
How big is the Uart2pwm PCB?
It measures 68 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uart2pwm use?
63 parts, built around the ATTINY2313A-SU and MAX232N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uart2pwm KiCad files?
From the Bytewerk/uart2pwm repository on GitHub, at the commit this page was made from: the board is Hardware/uart2pwm/uart2pwm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uart2pwm design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bytewerk before reusing the design.
Similar boards
- 2 layers78.3 × 74.6 mm
- 2 layers482.6 × 35.6 mm
- 2 layers70 × 44 mm
- 2 layers31.7 × 23.7 mm
Avr hid usb init tester
bga/avr-hid-usb-init-tester
Avr attiny2313 soft usb hid "keyboard" for testing bios usb initialization. Device is blinking if bios assign usb endpoint address and continue sending USB SOF (ie bios in alive).
20 parts3 - 2 layers28.4 × 30 mm
- 2 layers
Device plan
lyase/hello-bulb
making the simplest usb device using atmel2313 the board design is available in kicad format .code is c, licence GPL V3
29 parts2 - 2 layers150.2 × 62.6 mm
