2 layers64.1 × 98.3 mm
Lora life jacket
bytecod3/lora-life-jacket
Electronic device for life jackets with LORA data transmission
17 parts2Apache-2.0
2 layers43 × 100 mm
Lora jacket base station
bytecod3/lora-life-jacket2Electronic device for life jackets with LORA data transmission
- Size
- 43 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 44
- Pads
- 68
- Tracks, vias
- 156, 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Nov 2024
- Updated
- 25 Jan 2025
Overview
Lora jacket base station is an open-source printed circuit board by bytecod3, from the bytecod3/lora-life-jacket repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 43 × 100 mm with 6 parts on 44 nets, routed with 156 tracks and 14 vias.
It is built around the NODEMCU-32SLUA and RA-01H. Its parts include 2 ICs, 1 resistor, 1 diode and 1 connector. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
Main components
2README
README.mdlora-life-jacket
Electronic device for life jackets with LORA data transmission
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 200R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABI-010-RC | BZ1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | GREEN | LED_THT:LED_D3.0mm | D1 |
| 1 | NODEMCU-32S | NODEMCU-32S:MODULE_NODEMCU-32S | U1 |
| 1 | RA-01H | RA-01H:XCVR_RA-01H | U2 |
More from bytecod3/lora-life-jacket
1Similar boards
- 2 layers41.5 × 85 mm
- 2 layers82 × 50 mm
ESP S3 MONITOR V 1 2
electromotif208/pcb-portfolio
👨💻 Electronics Engineer 📺 YouTube: ELECTROMOTIF 🔧 Tools: KiCad, EasyEDA 📡 Domains: Power Supply, ESP32, IoT, Embedded Hardware
90 parts - 2 layers66.8 × 65.3 mm
/Cooee_brains.kicad_pcb.jpg?size=s&soon)
Cooee brains
DetectiveMittens/Cooee
An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication
79 parts3GPL-2.0 - 4 layers40 × 40 mm
ESP32 Board V2
Tay0710/Design_S1_006
This project integrates hardware, firmware, and design elements to develop a fully functional autonomous 3D mapping drone system.
42 parts3 - 2 layers50 × 100 mm
Corrector de postura
agustin-arg/Posture
Dispositivo electrónico de corrección de postura corporal
23 parts5 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5 - 2 layers91.4 × 76.2 mm
- 2 layers65.5 × 51.8 mm
IOT
hopkinskong/eie553-iot-hardware
ESP32 IOT Smart Lock Device Hardware Schematic and PCB used in the course "EIE553 Security in Data Communication".
14 parts2
Questions
How big is the Lora jacket base station PCB?
It measures 43 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lora jacket base station use?
6 parts, built around the NODEMCU-32SLUA and RA-01H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora jacket base station KiCad files?
From the bytecod3/lora-life-jacket repository on GitHub, at the commit this page was made from: the board is hardware-design/lora-jacket-base-station/lora-jacket-base-station.kicad_pcb and its schematic hardware-design/lora-jacket-base-station/lora-jacket-base-station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora jacket base station design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).