2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers42 × 58.5 mm
Pressure Reporter
buteomont/Pressure-Reporter- Size
- 42 × 58.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 18
- Pads
- 35
- Tracks, vias
- 63, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 May 2025
- Updated
- 24 Jun 2025
Overview
Pressure Reporter is an open-source printed circuit board by buteomont, from the buteomont/Pressure-Reporter repository on GitHub. It is a 2-layer board of 42 × 58.5 mm with 8 parts on 18 nets, routed with 63 tracks and 0 vias.
It is built around the WEMOS D1 MINI. Its parts include 3 resistors, 2 ICs, 1 diode and 1 switch. It belongs with the ESP8266 boards of this library.
Main components
1Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 128x32_OLED_Display | Davids_Footprints:OLED_0.91_128x32 | DISP1 |
| 1 | 5.1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 62 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | Green | LED_SMD:LED_1210_3225Metric | D1 |
| 1 | Pressure Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | U2 |
| 1 | Show | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
Similar boards
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
Questions
How big is the Pressure Reporter PCB?
It measures 42 × 58.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pressure Reporter use?
8 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pressure Reporter KiCad files?
From the buteomont/Pressure-Reporter repository on GitHub, at the commit this page was made from: the board is resources/KiCad/Pressure Reporter/Pressure Reporter.kicad_pcb and its schematic resources/KiCad/Pressure Reporter/Pressure Reporter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pressure Reporter design in my own project?
Its repository states no licence, so its author keeps all rights: ask buteomont before reusing the design.