

Buttons
Orange Pi Zero based web radio
- Size
- 31 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 33
- Pads
- 105
- Tracks, vias
- 167, 24
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Oct 2018
- Updated
- 1 Jun 2025
Overview
Buttons is an open-source printed circuit board by burgrp, from the burgrp/retradio repository on GitHub. It is a 2-layer board of 31 × 38 mm with 31 parts on 33 nets, routed with 167 tracks and 24 vias.
It is built around the ATSAMD11D14A-SSU. Its parts include 12 resistors, 10 capacitors, 4 connectors, 2 crystals and 1 IC. It belongs with the SAM D and SAM boards of this library.
Main components
1README
README.mdOrange Pi Zero based web radio
I2C peripherals
Rotary EncoderX
Addressing
- 0x40 NN Volume
- 0x41 AN Balance
- 0x42 BN Treble
- 0x43 NC Bass
- 0x44 AC Aperture
- 0x45 BC Tuning
- 0x46 ND Band
Push buttons
- 0x49 NN 7 Bands switch
Docker image
Start buildx builder
docker buildx create --name cross
docker buildx inspect --bootstrapBuild the image
docker run --rm --privileged docker/binfmt:820fdd95a9972a5308930a2bdfb8573dd4447ad3
docker buildx build --platform linux/arm/v7 . -t burgrp/retradio --pushDEVICE.FARM
OS installation
defa install device-id /dev/your-sd-card --wifi=ssid:password --ssh - --dto $PWD/mb-a/dto --root $PWD/mb-a/rootRetradio service installation
defa proxy device-id -- docker pull burgrp/retradio
defa proxy device-id -- docker-compose up -dor
./update-devices device-id ...Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 10 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 2 | GS3 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | J1, J2 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2 |
| 1 | ATSAMD11D14A-SS | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | Buttons | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | I2C-6P | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | X1 |
| 1 | LEDs | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | SWD | Drake:SWD | X2 |
More from burgrp/retradio
2- 2 layers39 × 57 mm

- 2 layers32 × 26 mm

Similar boards
- 2 layers76.2 × 50.8 mm

- 4 layers68.6 × 53.3 mm

Pcb main nautilus atmega4809
apcountryman/pcb-main-nautilus-atmega4809
A Microchip ATmega4809 based mainboard PCB.
91 parts - 2 layers21.6 × 26.7 mm

- 2 layers44.5 × 46.9 mm

OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm

MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm

CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm

Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT
Questions
How big is the Buttons PCB?
It measures 31 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buttons use?
31 parts, built around the ATSAMD11D14A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buttons KiCad files?
From the burgrp/retradio repository on GitHub, at the commit this page was made from: the board is buttons/board/buttons.kicad_pcb and its schematic buttons/board/buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buttons design in my own project?
Its repository states no licence, so its author keeps all rights: ask burgrp before reusing the design.